Page 117 - Wago_Rail-MountedTerminalBlockSystems_Volume1_2015_US.pdf

X-COM @-SYSTEM-MINI S
®
1-Conductor/1-Pin Carrier Terminal Blocks; 2
2-Conductor/2-Pin Carrier Terminal Blocks, 2020 Series 115

0.14 - 1 (1.5) mm² 1 AWG 24 - 16 0.14 - 1 (1.5) mm² 1 AWG 24 - 16
500 V/6 kV/3 2 500 V/6 kV/3 2
I N 13.5 A 3 I N 13.5 A 3
Terminal block width 3.5 mm / 0.138 in Terminal block width 3.5 mm / 0.138 in
L 9 - 11 mm / 0.39 in 4 L 9 - 11 mm / 0.39 in 4
1 Conductor sizes: 0.14 mm² – 1.5 mm² “s + f-st”; 2
Push-in conductor sizes: 0.5 mm² – 1.5 mm² “s”
and 0.5 mm² – 0.75 mm²
“insulated ferrule, 10 mm”
2 500 V = rated voltage
6 kV = rated surge voltage
3 = pollution degree
(see Section 14)
32,5 mm/ 1.28 in 32,5 mm/ 1.28 in 3 Current-carrying capacity curves upon request
4 Strip length, see packaging or instructions.
5 See application notes for:
Colored push-in type jumper bars, page 101
Star point jumper, page 103
28,6 mm/1.13 in 38,3 mm/1.51 in Delta jumper, page 103
48,5 mm/1.91 in 85,2 mm/3.35 in Push-in type wire jumper, page 102
Pack. Pack. Accessories
Item No. Item No.
Unit Unit
1-conductor/1-pin carrier terminal block, 2-conductor/2-pin carrier terminal block,
for DIN 35 rail, acc. to EN 60715 for DIN 35 rail, acc. to EN 60715
gray 2020-1201 50 gray 2020-1401 50 1-conductor female plug
blue 2020-1204 50 blue 2020-1404 50 Pole 1 gray 2020-102 100
1-conductor/1-pin ground carrier terminal block, 2-conductor/2-pin ground carrier terminal block,
for DIN 35 rail, acc. to EN 60715 for DIN 35 rail, acc. to EN 60715 2-conductor female plug
green-yellow 2020-1207 50 green-yellow 2020-1407 50 Pole 1 gray 2020-202 100
Notice: Notice:
An end plate must be applied to the carrier terminal blocks An end plate must be applied to the carrier terminal blocks Test plug adapter,
after each female plug. after each female plug. for 4 mm Ø test plug
Item-Specific Accessories Item-Specific Accessories gray 2009-174 100 (4x25)
End and intermediate plate, 1 mm thick End and intermediate plate, 1 mm thick Banana plug,
orange 2020-1292 100 (4x25) orange 2020-1492 100 (4x25) for socket 4 mm Ø,
gray 2020-1291 100 (4x25) gray 2020-1491 100 (4x25) color mixed
215-111 50
2020 Series Accessories Testing tap,
Appropriate marking systems: WMB/Marking strips for max. 2.5 mm² 100 (4x25)
gray
2009-182
(see Section 13)
Push-in type jumper bar, insulated, Star point jumper, insulated, Marking strip, plain,
5 I N 14 A, 5 I N = I N terminal block, light gray 11 mm wide,
light gray 1-3-5 2000-405/011-000 50 m roll
2-way 2000-402 200 (8x25) 100 (4x25) white 2009-110 1
3-way 2000-403 200 (8x25) Push-in type wire jumper, WMB Multi marking system,
4-way 2000-404 200 (8x25) 5 insulated, 10 strips with 10 markers per card,
5-way 2000-405 100 (4x25) I N 16 A, for 3.5 mm terminal block width
6-way 2000-406 100 (4x25) wire size 1.5 mm² plain 793-3501 5
7-way 2000-407 100 (4x25) L = 60 mm 2009-402 100 (10x10) Screwless end stop,
8-way 2000-408 100 (4x25) L = 110 mm 2009-404 100 (10x10) for DIN 35 rail,
9-way 2000-409 100 (4x25) L = 250 mm 2009-406 100 (10x10) 6 mm wide
10-way 2000-410 100 (4x25) gray 249-116 100 (4x25)
Push-in type jumper bar, insulated, Protective warning marker, Screwless end stop,
I N 14 A, with high-voltage symbol, black, for DIN 35 rail,
light gray for 5 terminal blocks 10 mm wide
from 1 to 3 2000-433 200 (8x25) yellow 2000-115 100 (4x25) gray 249-117 50 (2x25)
from 1 to 4 2000-434 200 (8x25) Carrier with 6 coding pins,
from 1 to 5 2000-435 100 (4x25) for coding female plugs
from 1 to 6 2000-436 100 (4x25) orange 2020-100 100 (4x25)
from 1 to 7 2000-437 100 (4x25)
from 1 to 8 2000-438 100 (4x25) Test pin,
from 1 to 9 2000-439 100 (4x25) 1 mm Ø
from 1 to 10 2000-440 100 (4x25) 859-500 1
Delta jumper, insulated,
5 I N = I N terminal block, light gray
1-2 3-4 5-6 2000-406/020-000
100 (4x25)
Certification organizations can be found in the overview on pages 622 and 623.