Page 515 - Wago_Rail-MountedTerminalBlockSystems_Volume1_2015_US.pdf

13

513
Shield clamping saddle
diameter of compatible conductor
22 to 40 mm

Pack.
Item No.
Unit
Shield clamping saddle,
43 mm wide,
Note: Cannot be used for connecting ground conductors.
790-140 50 (5x10)
Accessories for Shield Clamping
Saddles

Insulated mounting foot,
for busbar with screw M4 x 8 mm
gray 790-100 50 (2x25)
Insulated mounting foot,
for busbar with sheet metal screw
(3.5 x 9) mm
gray 790-101 50 (2x25)
U-shaped busbar,
Cu 10 x 3 mm,
suitable for 750 Series I/O modules
for 5 I/O 790-190 25 (5x5)
U-shaped busbar,
Cu 10 x 3 mm,
suitable for 750 Series I/O modules
for 8 I/O 790-191 25
U-shaped busbar,
Cu 10 x 3 mm,
suitable for 750 Series I/O modules
for 5 I/O 790-192 25
U-shaped busbar,
Cu 10 x 3 mm, Assembly Removal
suitable for 750 Series I/O modules
for 8 I/O 790-193 25 The shield clamping saddle is shipped ready for direct To remove the clamping saddle, unscrew until ratcheted
connection to the busbar 10 mm x 3 mm or to a drilled
mechanism is released, then slightly tip saddle and remove
mounting plate. After connection, tighten the knurled screw the clamping saddle.
<_____________ A_____________> to complete the installation.
Maximum tightening torque: 0.5 Nm
<_____B_____> 13

3 > 6<
> 15 <_
_ 4 10<
> < >
<______________ C ______________>
Dimensions in mm
Item No. A B C Item No. A B C
suitable for I/O module series 750 (5 E/A)
790-190 63 60 83 790-192 63 35 83
suitable for I/O module series 750 (8 E/A)
790-191 100 60 118 790-193 100 35 118
Dimensions in mm