Page 85 - Wago_Rail-MountedTerminalBlockSystems_Volume1_2015_US.pdf

Circuit Configuration Examples S
Diode Terminal Blocks and LED Terminal Blocks 1
83

1

Open diode gates can be created using the follow- These diode terminal blocks have been specially devel-
ing terminal blocks: oped for custom diode circuits, such as lamp test and col-
2002-1211/1000-410 or lective fault signal circuits.
2002-1211/1000-411
1 Conductor sizes: 0.25 mm² – 4 mm² “s + f-st”;
Push-in conductor sizes: 0.75 mm² – 4 mm² “s”
and 0.75 mm² – 2.5 mm²
“insulated ferrules, 12 mm”
2 Strip length, see packaging or instructions.
2002 Series Accessories

Insulation stop,
5 pcs/strip,
0.25 - 0.5 mm²
light gray 2002-171 200 (8x25)
Insulation stop,
5 pcs/strip,
0.75 - 1 mm²
dark gray 2002-172 200 (8x25)
Polarized diode gates with common cathode can be Circuit-related voltage indications can be created Push-in type jumper bar, insulated,
created using the following terminal blocks: using the following terminal blocks: I N 25 A,
2002-1311/1000-410 or 2002-1321/1000-434 or
2002-1311/1000-411 2002-1321/1000-413 light gray
2-way 2002-402 200 (8x25)
3-way 2002-403 200 (8x25)
4-way 2002-404 200 (8x25)
5-way 2002-405 100 (4x25)
6-way 2002-406 100 (4x25)
7-way 2002-407 100 (4x25)
8-way 2002-408 100 (4x25)
9-way 2002-409 100 (4x25)
10-way 2002-410 100 (4x25)
Push-in type jumper bar, insulated,
I N 25 A,
light gray
from 1 to 3 2002-433 200 (8x25)
from 1 to 4 2002-434 200 (8x25)
from 1 to 5 2002-435 100 (4x25)
from 1 to 6 2002-436 100 (4x25)
from 1 to 7 2002-437 100 (4x25)
from 1 to 8 2002-438 100 (4x25)
Polarized diode gates with common cathode can be Circuit-related voltage indications can be created from 1 to 9 2002-439 100 (4x25)
created using the following terminal blocks: using the following terminal blocks: from 1 to 10 2002-440 100 (4x25)
2002-1411/1000-410 or 2002-1421/1000-434 or
2002-1411/1000-411 2002-1421/1000-413