Page 94 - Parker - AC and DC drives and motors
P. 94

Accessories and Options

        DC590+ Integrator Series 2 DC Drives
        Dynamic Braking and Contactors




         Dynamic Braking Resistor Kits
                                   230 Volt                        460 Volt
            Drive HP
                         Part Number  Resistance (Ohms)  Part Number  Resistance (Ohms)
              3             N/A             N/A          CZ353134           62
              5           CZ353160          8.6          CZ353135           36
              7.5         CZ353161          6.04         CZ353136           27
              10          CZ353162          4.6          CZ353137           20
              15          CZ353163           3           CZ353138           12
              20          CZ353164           2           CZ353139           10
              25          CZ353165           2           CZ353140           7
              30          CZ353166          1.4          CZ353141           7
              40          CZ353167           1           CZ353142           4.5
              50          CZ353168           1           CZ353143           4.5
              60          CZ353169          .742         CZ353144           4
              75          CZ353170          .58          CZ353145           2.8
              100         CZ353171          .452         CZ353146           2
              125         CZ353172          .384         CZ353147          1.71
              150         CZ353173          .325         CZ353148          1.28
              200         CZ353174          .255         CZ353149          1.11
              250         CZ353175          .196         CZ353150          .768
              300         CZ353176          .176         CZ353151           .72
              400         CZ353177          .137         CZ353152          .504
              500         CZ353178           .1          CZ353153           .38
              600           N/A             N/A          CZ353154           .38
              700           N/A             N/A          CZ353155          .288
              800           N/A             N/A          CZ353156           .23
              900           N/A             N/A          CZ353157           .23
             1000           N/A             N/A          CZ353158           .2


        Armature Contactor Options
          Part Number    HP (230V)   HP (460V)  NOTES
        3-pole DC loop contactor including D/B contact
           955+ADC30       1-7.5       1-15    For use with DC590+ frames 1 and 2, this option provides a 3 pole DC loop contactor
           955+ADC60       10-15      20-30    with dynamic braking contact to isolate the motor armature from the drive. Dynamic
                                               braking requires a D/B Resistor Kit in addition.
          955+ADC130       20-40      40-75
          955+ADC220        50         100
        D/B contact kit
           955+DBC35       1-10        1-20    All DC590+ DRV units (except 125 and 250 HP, which include a D/B contact on the DC
           955+DBC70       15-20      30-40    contactor) require a separate dynamic braking contact kit if D/B is required. Through
                                               100 HP, the kits use a 4-pole AC contactor pre-wired to the drive terminals. 300 HP and
          955+DBC110       25-30      50-60
                                               above, kits use a single pole DC contactor that requires 120 VAC control power to close.
          955+DBC162       40-50      75-100   The D/B contact must be factory installed and requires a larger panel. D/B contact kits
          955+DBC2400*    150-700    300-1500  are designed to meet NEMA D/B requirements when used with D/B resistors above.
          955+DBC3000*   800-1000   1750-2000



                                                              94
   89   90   91   92   93   94   95   96   97   98   99