Page 58 - Linde - VT1 Modular, modular system for LSC manifold valve plates

5 | Assembly of System components. VT1EA/VT1EP with pilot control

VT1EA / VT1EP and selected pilot control
The assembly of the VT1EA and the VT1EP module is identical at this point.
VT1EA / VT1EP with ABP air-bleed plates for hydraulic actuation
This combination is used for hydraulic actuation of a directional control valve fitted on a VT1EA or VT1EP expansion module. The ports
to be used for this are located on top of the directional control valves. The ABP modules are bolted onto the fronts of the VT1EA or
VT1EP in pairs. You must ensure that the O-rings of the ABP modules with the associated Pst, T0 and p x/y holes fit on top of each
st
other.

VT1EA or VT1EP ABP VT1EA/ABP or VT1EP/ABP

+ =

During assembly or installation, proper handling
4x O-Ring-7,5x2-V80 each of the O-rings must be ensured.

4x ZS-M6x25-912-8.8
Mounting bolts, Tightening torque 9,5Nm

circuit diagram

VT1EA/ABP VT1EP/ABP

Port Port size DN Max. per-
function missible
pressure
P - Pump SAE 1 1/2’’ ISO 6162-2 38 400bar
4x M16 / 29 deep / M = 295Nm 1)
A
1) dependent on screwproperty class according to ISO

Weight [kg] ca. 18,0
Dimensions [BxHxT] 120 x 110 x 266 mm

58