Page 118 - Modul administrasi infrastruktur jaringan kelas XI SMK - andi setiawan

Pastikan R1 dan R3 dapat melakukan ping ke 1.1.1.1 baru lakukan konfigurasi HSRP.

R1#ping 1.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/2/10 ms

R3#ping 1.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/2/10 ms

Konfigurasikan HSRP

R1(config)#int fa0/0
R1(config-if)#sta
R1(config-if)#standby ?
<0-4095> group number
ip Enable HSRP and set the virtual IP address
ipv6 Enable HSRP IPv6
preempt Overthrow lower priority Active routers
priority Priority level
timers Hello and hold timers
track Priority Tracking
version HSRP version
R1(config-if)#standby 1 ip 13.13.13.13
R1(config-if)#standby 1 preempt
%HSRP-6-STATECHANGE: FastEthernet0/0 Grp 1 state Speak -> Standby
%HSRP-6-STATECHANGE: FastEthernet0/0 Grp 1 state Standby -> Active
R1(config-if)#standby 1 priority 105
R1(config-if)#standby 1 track fa0/1

R3(config)#int fa0/0
R3(config-if)#standby 1 ip 13.13.13.13
R3(config-if)#standby preempt

Selanjutnya silahkan isi ip di masing-masing pc dengan gateway 13.13.13.13, kemudian
lakukan ping dan tracert ke 1.1.1.1

Remember me in your pray