Page 16 - ELS_KZJ

S
. Date of month
N Equipment issue Holding (Locos) Locos/ Qty to be provided Provided up to last year Provided during the Cumu. during current year Balance Action plan
o
(g) Parallelism and perpendicularity of
brake hangers should ensured at the time of 31.05.1 97 37 37 -- -- -- Being done during IOH
IOH/POH or replacement of brake hangers 8
on test jig SMI/0251 (Rev'2')
(h) Clearance of 13mm between bogie 31.05.1
frame and brake hanger should be ensured 8 97 37 37 -- -- -- Being followed
SMI/0251 (Rev'2')
(i) Brake hangers of different makes and 31.05.1 Ensuring that different make/ design
designs should not be provided in the same 8 97 37 37 -- -- -- hangers not available in one assembly
assembly SMI/0251 (Rev'2')
Air delivery measurement in three phase
loco to ascertain proper cooling and 08.05.0 Continuous activity. Being carried out
6. 97 97 -- -- -- --
pressurization of machine room (SMI/0255 9 by PPO in every schedule.
Rev'0')
Modified instructions on maintenance
practices and use/ replacement of spares/ 09.12.0 Continuous activity. Being carried out in
7. 97 97 -- -- -- --
material for traction link and housing for 3Ph 9 every schedule.
locos (SMI/0259 )
Maintenance of Traction motor support
plate and bogie nose to prevent crack/ 16.03.1
8. breakage of traction motor support plate. 6 97 97 -- -- -- NIL All TM back plates are 8mm and
(Holder for Traction motor -suspension) (Rev-1) above.
(SMI/0269 )
16.03.1
DPT should be conducted on motor support
9. 6 97 97 -- -- -- -- Being followed as regular activity.
during TOH/IOH/POH
(Rev-1)
16.03.1
Checking of the condition of Spheribloc’s of
10. 6 97 97 -- -- -- -- Being followed as regular activity.
TM support torque arms during all schedules
(Rev-1)
Creating facility/ Measurement of axial
11. wear of Spheribloc before re-using 17.11.1 97 97 -- -- -- -- Being replaced as must change item in
IOH. Every 4 years.
1
(SMI/0270 )
Special maintenance instruction to prevent
12. falling of Brake Hanger in middle axles of 16.09.1 97 60 51 -- 09 NIL Completed.
4
WAP-7 locomotives (SMI/282)
Use of induction heater for heating of end 08.11.1
13. 97 97 -- -- -- -- Being followed.
shields/ end frames of TMs for bearing 6