Page 70 - Icon Ridge Carpentry and Roofing Catalog

Roof, Wall, Facade

HT Tension Anchor

• With European Technical Approval ETA-10/0010
• Absorption of high tensile loads in timber frame construction Your Advantage / Benefit
• Tension anchor also suitable for prop connectors
• Use of pressure plates for tensile loads of more than 42.0 kN Reduced overall height
• Fastening in wood, even over intermediate layers (e.g., OSB3 Short fillet height (150 mm)
panels) Optimised hole pattern
• Fastening material: Anchor/ring shank nails, angle fitting screws and Pressure plates optional
dowels with corresponding approval

8881 5 340 60 8881 5 60

Technical Data
Dimensions No. of holes Hole Ø for
in mm Ø 5 mm dowel
Article No. Article Description QTY (H × L × W × D)
8881 5 340 60 HT16 TENSION ANCHOR 10 340 × 60 × 63 × 3.0 20 17
8881 5 440 60 HT22 TENSION ANCHOR 10 440 × 60 × 63 × 3.0 30 17
8881 5 540 60 HT28 TENSION ANCHOR 10 540 × 60 × 63 × 3.0 42 17
8881 5 620 80 HT34 TENSION ANCHOR 10 620 × 60 × 63 × 3.0 52 22
8881 5 60 HT PRESS.PLATE HT16-28 10 - × 50 × 56 × 10.0 - 18
8881 5 80 HT PRESS.PLATE HT34 10 - × 70 × 77 × 20.0 - 22

Related Products

Anchoring Nails / Angle Fitting Screws, Nails Compressed Air Nailer
Ring Shank Nails Galvanised Steel AGR 8356 Art. No. 5357 2 16 50
AGR 8854 AGR 8853 5

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 70