Page 73 - Icon Ridge Carpentry and Roofing Catalog

oof
all,
, W
R
acade
F
Roof, Wall, Facade
Tension Anchor
• With European Technical Approval ETA-10/0010
• Optimised nail pattern for optimum load capacity
• Partial nailing possible
• For absorbing wind loads in timber studding and timber frame
construction
• The load is passed into the base plate by means of a washer and
suitable dowel
• 275 g/m² anti-corrosion protection on both sides
• Connection to concrete/masonry/Halfen rails
• Fastening material: Anchor/ring shank nails, angle fitting screws and
dowels with corresponding approvals

(Drawing provided as an example)

Technical Data
Dimensions Thick- Dowel Ø No. of Hole Ø Dimensions Hole Ø
in mm ness holes in mm of washer of washer
(L × H × W) in mm in mm in mm
182 × 340 × 40 2.0 M12 23 5.0 160 × 50 × 15 12.5
123 × 400 × 40 3.0 M16 23 5.0 110 × 60 × 15 16.5
222 × 420 × 60 2.0 M16 38 5.0 200 × 60 × 20 16.5
102 × 420 × 60 2.0 M20 38 5.0 85 × 60 × 20 20.5
123 × 480 × 60 2.5 M20 38 5.0 115 × 70 × 20 20.5

Article No. Article Description QTY
8881 4 340 182 TENSION ANCH.2-PART 340X182X40 10
8881 4 400 123 TENSION ANCH.2-PART 400X123X40 10
8881 4 420 102 TENSION ANCH.2-PART 420X102X60 10
8881 4 420 222 TENSION ANCH.2-PART 420X222X60 10
8881 4 480 123 TENSION ANCH.2-PART 480X123X60 10

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 73