Page 167 - Industrial Tools Catalog (1)

Reaming tools \ Processing and machining technology - Reaming

Mounting instructions SC HPC machine reamer modular
Mounting of solid carbide interchangeable heads

Note:
ƒ To avoid the risk of injury, we recommend wearing gloves

1. Clean the interchangeable head 2. Clean the interchangeable head 3. Then screw the interchangeable 4. Place the torque wrench as horizon-
with compressed air and a cloth on holder with compressed air and a head clockwise by hand into the tally as possible onto the interchange-
the tapered contact face and thread. cloth on the tapered contact face and interchangeable head holder. After- able head without tilting with the
thread. wards, clamp the interchangeable wrench surface.
head holder and tool into the machine Tighten the interchangeable head
holder. using the torque wrench and the
appropriate jaw socket wrench to the
specified tightening torque.
Tightening torques of the interchangeable heads:
Separation point size Tightening torque
WKS [Nm]
6 5
8 12,5
10 15
12 20
16 25

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 167
Availability subject to country specific rules and regulations.