Page 486 - Industrial Tools Catalog (1)
P. 486
Lathe tools \ Technical introduction–turning - ISO turning
Cemented carbide grades ISO N
Highly positive ground and polished ISO N type for non-ferrous metals with improved substrate!
Advantages:
Improved basic substrate
Extremely positive cutting
Highly form-fitting coating
Polished chip surfaces
range of applications
application coating
01 05 10 15 20 25 30 35 40 45
ISO PVD HC6310
N
HW6310
HW6310 HC6310
Application The high-performance one in non-ferrous metals! The high-performance one with form-fitting coating!
High-performance variety for machining in non-ferrous metals High-performance variety for finishing in stainless steel, steel and
with high hardness and wear resistance and low tendency to non-ferrous metalworking with high hardness and wear resistance
stick for use in good to unfavourable operating conditions. and low tendency to stick for use in good to unfavourable oper-
ating conditions.
Application
Substrate N10/M01/P01 N10/M01/P01
Grain size <1 µm <1 µm
Type of coating PVD, TiN
Coating thickness 5 µm
Operating conditions Good-unfavourable Good-unfavourable
cutting speed
Hardness
Toughness
Insert MN – extremely positive cutting optimised for non-ferrous metalworking!
Advantages Very positive chip breaker optimised for a wide range of cut depths and high surface qualities
Very low cutting forces and good chip breakage
Wide clamping range for smoothing and moderate machining
Optimised geometry for long-chipping non-ferrous metals
Stability
Cutting forces
Surface quality
N
16
a ( mm ) p 10 6,3 MN
4 MN
2,5
1,6
1
0,63
0,4
0,25
25°
0,16
0,1
0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1 1,6 2,5
f ( mm )
Cemented carbide grades ISO N
Positive ground and polished ISO N type for non-ferrous metals with the latest substrate!
Advantages:
Innovative basic substrate
Positive cutting geometry
Highly form-fitting coating
Polished chip surfaces
Wide range
range of applications
application coating
01 05 10 15 20 25 30 35 40 45
ISO PVD ACN15T
N
AWN15T
AWN15T ACN15T
Application The high-performance one in non-ferrous metals! The high-performance one with form-fitting coating!
High-performance variety for machining in non-ferrous metals High-performance variety for finishing in stainless steel, special
with high hardness and wear resistance and low tendency to alloys and non-ferrous metalworking with high hardness and
stick for use in good to unfavourable operating conditions. wear resistance and low tendency to stick for use in good to
unfavourable operating conditions.
Source: Hahn+Kolb Werkzeuge GmbH
486 Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations.
