Page 589 - Icon Ridge Presents ATORN

Tool clamp \ Setting and measuring instruments
3D edge fi nder
With dial gauge

SK
40
Application:  IP 67 degree of protection: temporary immersion in water possible and dust-
Suitable for defi ning and setting workpiece reference points in all 3 axes (X, Y proof according to DIN EN 60529
and Z) on all milling machines and machining centres. The workpiece is meas-
ured in any direction with the measuring probe until both indicators are at ‘0’. Advantage:
 Metallic housing with very good visibility of readings
Execution:  Can be used with all tool and eroding machines
 Direct path measurement along Z axis, can be used vertically and horizontally,  Easy reading off of actual value
concentricity can be readjusted via 4 screws
 Nominal breaking point on the measuring probe prevents damage to the work- Delivery:
piece or dial gauge Including short fi nder insert ref. no. 23924004

p. 811

Ident. No. 010 Ident. No. 020
Tool holding Clamping Probe head Housing Meter Ø Scale value Sensor Repeat IP protection 23924... 23924...
device shank Ø Ø (mm) width (mm) (mm) (mm) insert length accuracy class Ident. No. Ident. No.
(mm) (mm) (+/-) (mm)
- 20 4 65 57 0.01 33 0.01 IP 67 010 - -
SK 40 - 4 65 57 0.01 33 0.01 IP 67 - - 020
Prod. Gr. 234

Probe insert
Replacement parts for 3D edge fi nder, ref. no. 23924 010-020

Execution:
 Nominal breaking point on measuring probe prevents damage to 3D edge fi nder
 Short version ref. no. 23924004
 Long version ref. no. 23924008

Ident. No. 004

Probe head Ø (mm) 4 8 Ident. No. 008
Sensor insert length (mm) 33 75
Repeat accuracy (+/-) 0.01 0.01
(mm)
23924... Ident. No. 004 008

Prod. Gr. 234

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 589

0810_EN_2018_KERN[21850012]-n.indd 811 12/17/2018 3:34:12 PM