Page 83 - Icon Ridge Sanitary-Heating-Air Catalog

Building Services

Insulation for Ball Valves

The clever insulation for ball valves for virtually all common
European ball valve types
• Made of closed-cell foamed polyethylene with additional firm mesh
effect made of PE
• Easy and rapid assembly: shift, fold and securely closed by means of
closing clips
• Equipped with universal recess
• Warm remains warm – cold remains cold!
• Avoids formation of condensation water
• A non-insulated valve emits as much heat or absorbs as much
heat as several meters of tube
• Offers a rapid and easy mountable closing of gaps in professionally
installed and exemplarily insulated cold water bearing drinking water
pipes, hot water bearing service water pipes, heating pipes as well
as industrial piping networks
• No time consuming cutting of isolation mats, no expensive individual
solutions or even brilliant valves which would reduce the overall
effect of costly mounted pipe insulations and which would impair the
optics of the system
Fields of application:
• DIN 1988 TRWI: Protection against heating up, formation of
condensation water and sound transmission of drinking water pipes
• EnEV Annex 5: Requirements to limit the heat emission of heat
distribution and heat water pipes as well as of fittings Technical Data
Thermal conduct./calcul. value: at 10°C ISO 2581 W/mk 0,035
Article No. Article Description QTY at 40°C ISO 2581 W/mk 0,040
8729 2 15 INSULATION BALL VALVE 1/2"DN15 e 10 Noise insulation: DIN 4109 dB
8729 2 20 INSULATION BALL VALVE 3/4"DN20 e 10 Fire protection: Ü-No Z-23.14-1141 PE foam
8729 2 25 INSULATION BALL VALVE 1"DN25 e 10 is quality controlled DIN 4102 B1
8729 2 32 INSULAT.BALL VALVE 1 1/4"DN32 e 10 Water vapor permeability: ISO 1663 g/m² 1,1 (5,0 mm)
8729 2 40 INSULAT.BALL VALVE 1 1/2"DN40 e 5 Water vapor diffusion factor: µ > 4000
8729 2 50 INSULATION BALL VALVE 2"DN50 1 Use temperature: DIN 1988 -80°C to +100°C
Included in delivery:
• 2x Closing clips
• 1x Valve insulation

Insulation for AP Water Meters

The insulations for water meters are available with the connection
diameters ½” and ¾” for all products according to DIN
• Is an accurately fitting solution for water meters of the manufacturers
Allmess, Rossweiner, WasserGeräte GmbH, Conter Caracioni and
Sensus Metering Systems
• Made of closed-cell foamed polyethylene with additional firm mesh
effect made of PE
• Easy and rapid assembly: shift, fold and securely closed by means of
locking clips
• Equipped with universal recess
• Warm remains warm – cold remains cold!
• Avoids formation of condensation water
• A non-insulated valve emits as much heat or absorbs as much
heat as several meters of tube
Fields of application:
• DIN 1988 TRWI: Protection against heating up, formation of
condensation water and sound transmission of drinking water pipes
• EnEV Annex 5: Requirements to limit the heat emission of heat Technical Data
distribution and heat water pipes as well as of fittings Thermal conduct./calcul. value: at 0°C ISO 2581 W/mk 0,035
at 40°C ISO 2581 W/mk 0,040
Noise insulation: DIN 4109 dB
Fire protection: Ü-No Z-23.14-1141 PE foam
is quality controlled DIN 4102 B1
Water vapor permeability: ISO 1663 g/m² 1,1 (5,0 mm)
Article No. Article Description QTY
Water vapor diffusion factor: µ > 4000
8729 3 15 AP WATER MET.INSULAT.1/2"DN15 e 10
Use temperature: DIN 1988 -80°C to +100°C
8729 3 20 AP WATER MET.INSULAT.3/4"DN20 e 10
Included in delivery:
• 2x Closing clips
• 1x Valve insulation

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 83