Page 242 - Icon Ridge Working Gear

Working security

Fall Heights Fall Arrest Systems

According to § 33 VBG, §12 VBG 37 (accident-prevention The use of personal protection equipment is a strict requirement of the
regulations)§ 12 ArbStättV (German Workplace Ordinance). insurance industry. Our products are tested, approved and carry the
CE mark.
from 0 m over materials which you can sink into

> 1.0 m at all times when working on building sites:
on steps, wall openings, operating platforms
> 2.0 m on building sites

> 3.0 m on roofs

> 5.0 m for high-level masonry work and work on windows
(only painting and cleaning)

Fall arrest system, Universal

• For universal work with small radius of action
• Min. working height 6.25 m

Article No. Article Description QTY
4985 3 FALL ARR.SYST.UNIVERSAL-SET 1

Contents:
• Standard safety harness in accordance with EN 361 with anchor
points on chest and back
• Lanyard 2 m in accordance with EN 354 with tape shock absor-
ber complying with EN 365
• Carrier bag

Roof fall arrest system, Standard

• Suitable for work on sloping roofs
• Slide guided type fall arrestor to make it easier to work in changing
positions
• No minimum working heights

Article No. Article Description QTY
4985 4 ROOF SET STANDARD 1
Contents:
• Standard safety harness in accordance with EN 361 with anchor
points on chest and back
• Guided type arrestor 15 m in accordance with EN 353-2
• Tape sling 26 kN 1.5 m in accordance with EN 354, EN 566 and
EN 795-B
• Carrier bag

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 242