Page 39 - Industrial Tools Catalog (2)

Mechanical clamping elements \ Mechanical clamping elements

Stepped clamps

Execution: Advantage:
ƒ Special cast iron ƒ Ready for use in no time
ƒ For 14 mm bench grooves ƒ Fine detent steps enables quick adaptation
ƒ Fine detent steps enables quick adaptation ƒ Ready for use in no time
ƒ Up to 195 mm workpiece height ƒ Requires little space on the machine table

H
S
C
B
L

Groove width (mm) 14 14 14 14 14
B (mm) 34 34 34 34 34
H 0-45 mm 15-45 mm 30-75 mm 60-135 mm 120-195 mm
L (mm) 140 112 112 112 112
C (mm) 14 14 15 15 15
S (mm) 0.75 0.75 1.25 2.5 2.5
26233... Ident. No. 005 010 020 030 040
●
●
●
●
●
Prod. Gr. 260
Deep clamping jaws, model Bulle
Application: Advantage:
For clamping with draw-down effect. ƒ No protruding clamping screws
Execution: ƒ Clamps at every angle to the groove
ƒ Tempered Delivery:
ƒ With burnished finish 2 pieces in a box with fastening screws ISO 4762 (10.9), nuts for T-slots DIN 508
ƒ Wedge effect in forward and downward direction and hexagon screwdriver ISO 2936.
Notes:
Can also be supplied for groove widths of 20, 24 and 30 mm. Prices on request.

Suitable for groove width (mm) 12 14 16 18 22 28
C (mm) 3 3 4 4 5 5
l (mm) 80 80 100 100 140 140
l1 (mm) 39 39 46 46 50 50
l2 (mm) 26 26 34 34 36 40
Width b (mm) 40 40 50 50 78 78
Overall height of pull-down jaw h 20 20 25 25 30 30
(mm)
Clamping force F1 (kN) 16 22 32 36 36 40
Clamping force F2 (kN) 0.6 0.9 1.2 1.4 1.4 1.6
Suitable screw ISO 4762 M10 M12 M14 M16 M20 M24
26140... Ident. No. 020 030 040 050 060 070
●
●
●
○
●
●
Prod. Gr. 260

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 839
Availability subject to country specific rules and regulations.