Page 40 - Industrial Tools Catalog (2)
P. 40
Mechanical clamping elements \ Mechanical clamping elements
Flat clamp, model Mini-Bulle
Execution: absorbed by a screw fitting the size of the slot, which provides for perfect
With burnished finish clamping without damaging the table.
For flat workpieces Delivery:
Wedge effect in forward and downward direction 2 pieces in a box with fastening screws ISO 4762 (8.8) and hexagon screwdriver
Advantage: ISO 2936.
The wedge effect of the clamping jaws causes the workpiece to be pressed
down firmly and securely onto the machine table. The horizontal forces are
Suitable for groove width 12 14 16 18 22
(mm)
Min./max. height 2.5-13.5 mm 1.5-13.5 mm 2.5-17 mm 1.5-16 mm 4.5-21.5 mm
l (mm) 52 55 68 71 89
Width b (mm) 18 22 25 28 35
Clamping force F1 (kN) 5 5.5 8 9 16
Clamping force F2 (kN) 0.6 0.7 0.9 1 1.9
X (mm) 5 5 6 6 9
h1 (mm) 11 11 15 15 20
Clamping width c (mm) 1.8 1.8 2.5 2.5 3
26141... Ident. No. 010 020 030 040 050
●
○
●
●
●
Prod. Gr. 260
Stepped clamps (DIN 6318)
Application: Painted
For supporting adjustable clamps. Contact surface and step face-milled
Execution: With clamping stages, each with a height differ-
ence of 7.5 mm
Machine casting
Height (mm) 50 95 140 185 230
Min. step height (mm) 12.5 57.5 102.5 147.5 192.5
Width (mm) 42.5 95 100 105 110
26145... Ident. No. 010 020 030 040 050
○
●
●
●
●
Prod. Gr. 260
Source: Hahn+Kolb Werkzeuge GmbH
840 Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations.
