Page 62 - Industrial Tools Catalog (2)

Workpiece clamping \ Quick-action clamps
Version Horizontal Horizontal Horizontal
Size 2 3 4
Max. tensile force (kN) 1.6 3.2 7
Height H2 (mm) 99 135.5 171.5
Min./max. clamping width B1 42-76 mm 53.5-101 mm 66-130 mm
Hole spacing C (mm) 13 19 32
Hole Ø d (mm) 5.2 6.5 8.5
Min./max. distance between baseplate fastenings e 38-72 mm 48.6-96 mm 59-123 mm
Counter-holder height H (mm) 12 19 26
Overall height of lower handle H1 (mm) 99 135.5 171.5
Distance between centre and drill hole k (mm) 6.4 8 9.5
Min./max. long hole spacing m 19.5-23.5 mm 24.5-32 mm 35-46 mm
Min./max. length l1 125-159 mm 169-216 mm 209-273 mm
Base width P (mm) 26 35 53.5
Width N (mm) 38 48 64.3
26219... Ident. No. 310 320 330
●
●
●
Prod. Gr. 260
Vertical pull clamp
Complete with retainer
Application: ƒ Hook tempered
For quick and secure clamping on machine tables ƒ Case-hardened and lubricated bearing bushes
and appliances. ƒ Rivet made of stainless steel
Execution: ƒ Oil-resistant handle with large handle surface and
ƒ Galvanised and passivated soft components
Version Perpendicular Perpendicular Perpendicular
Size 2 3 4
Max. tensile force (kN) 1.6 3.2 7
Height H2 (mm) 99 136 168
Min./max. clamping width B1 24-49 mm 34.5-64 mm 43-81 mm
Hole spacing C (mm) 13 19 32 L2
Hole Ø d (mm) 5.2 6.5 8.5 L5 H2
Min./max. distance between baseplate 5-30 mm 7-36 mm 9-47 mm
fastenings e h1
Counter-holder height H (mm) 4.5 6 8 D1 K E B
Overall height of lower handle H1 (mm) 47 70 94.5 D F
Distance between centre and drill hole H
k (mm) 6.4 8 9.5 D
Min./max. long hole spacing m 19.5-23.5 mm 24.5-32 mm 35-46 mm N M C
Min./max. length l1 91-158 mm 125-190 mm 151-239 mm P
Base width P (mm) 26 35 53.5
Width N (mm) 38 48 64.5
26219... Ident. No. 410 420 430
●
●
●
Prod. Gr. 260
Dividers
Application: ƒ Direct division: via dividing plate with 24 positions for dividing 2-3-4-6-8-12-24
For horizontal and vertical milling, drilling, finishing and marking. ƒ Graduation via scale and adjustable vernier scale, scale interval: 1°
Execution: Delivery:
ƒ Body made from cast iron, dividing disc made of steel, hardened and polished, Divider with 3-jaw chuck made of cast iron with sliding blocks
concentricity tolerance of spindle: 0.02 mm, straightness tolerance of housing:
0.02 mm. Notes:
Delivered ex-works, postage and packaging excluded.

Point height (mm) 200
Dividing device height C (mm) 330
Locking arm height B (mm) 469
Lathe chuck Ø D (mm) 250
Through-bore d (mm) 76
Basic body width F (mm) 180
Width H (mm) 256
Length L (mm) 340
For groove width E (mm) 18
Morse taper size MK 4
Weight (kg) 86.5
25124... Ident. No. 200
+
●
Prod. Gr. 270

Source: Hahn+Kolb Werkzeuge GmbH
862 Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations.