Page 14 - CHAPTER 1

3.5 ERASE

This command is used to remove objects from a drawing

You can erase objects from your drawing using several methods.
 Erase them with ERASE.

 Select them and then cut them to the Clipboard with CTRL+X.
 Select them and press DELETE.

To erase an object

1. Click Home tab Modify panel Erase.
2. At the Select Objects prompt, use a selection method to select the objects to be erased or enter

an option:

 Enter L (Last) to erase the last object drawn.
 Enter p (Previous) to erase the last selection set.

 Enter all to erase all objects from the drawing.
 Enter ? to see a list of all selection methods.

3. Press ENTER to end the command
Command entry: E

3.6 CIRCLE

This command is used to create circles. For drawing various combinations of center, radius,
diameter, points on the circumference, and points on other objects should be specified.

To draw a circle by specifying a center point and radius or diameter
1. Do one of the following:

Click Home tab Draw panel Circle Center, Radius.

Click Home tab Draw panel Circle Center, Diameter
2. Specify the center point.

3. Specify the radius or diameter.

Command entry: C

3.7 ARC

This command is used to create an arc, by specifying various combinations of center, endpoint,
start point, radius, angle, chord length, and direction values

Amal Jyothi College of Engineering 14