Page 56 - APEX MRO Products

ADHESIVES, SEALANTS & TAPES

Industrial Safety Welding Oilfield Construction

ADHESIVES, SEALANTS & TAPES Floor Patch™ Plastic Steel® Liquid (B)

F•eaAtlul‑rpeusr:pose concrete patching compound with a compression Features:

strength of 8,000 psi, three times the typical strength of concrete. • 45‑minute working time.
• Can be machined to close tolerances.
• Easy‑to‑mix and apply. • Hardens in about an hour.
• Excellent adhesion to concrete, brick, masonry, metal or wood surfaces. • Ideal leveling compound for machinery and equipment.
• Excellent resistance to water, oils, solvents, and alkalis. • Low viscosity and high compressive strength.
• Acceptable for use in meat and poultry plants. • When cast over models, steel‑filled liquid epoxy provides
• 45‑minute working time.
• Viscosity ‑ Putty. accurate detail reproduction in the making of holding
fixtures, light‑gauge forming dies, and molds.
Test & Approvals: Chemical resistance was tested by immersion Test & Approvals: Chemical resistance was tested by immersion for 30
for 30 days at 75 °F, after 7 days room temperature cure days at 75 °F, after 7 days room temperature cure; Qualifies under Mil Spec
Color: Gray MMM‑A‑1754
Adhesive Tensile Shear: 3,500 psi Color: Dark Grey
Compressive Strength: 8,000 psi Adhesive Tensile Shear: 2,800 psi
Gap Fill: 1/4 in Compressive Strength: 10,200 psi
Chemical Compound: Epoxy Chemical Compound: Epoxy
Working Time: 45 min Working Time: 45 min
Dielectric Strength: 30 V/mil

SKU Capacity Vol. SKU Capacity Vol. Tensile Strength Packing Type
230‑13120 40 lb 230‑10210 1 lb 4,900 psi Can
230‑10220 4 lb 4,900 psi Kit

HP 250 Epoxy Plastic Welder™

•FeaHtiugrhe‑sp:erformance, gap‑filling thixotropic paste •FeaEtnusruerse: an ultra‑tough bond; use a tough, structural

for structural bonding applications. adhesive with superior impact and peel resistance.

• Superior toughness, impact and chemical resistant. • Easy‑to‑use, with minimal surface preparation.
• Bonds metals, FRP/SMC composites, phenolics, stainless steel, aluminum, • Bonds dissimilar substrates as well as unprepared surfaces;

vinyl esters, nylon, PVC, PC, styrenics, wood, and rigid plastics. great for engineered plastics, metals, ceramics, concrete,
polyesters, polycarbonate, wood and more.
• Excellent gap fill.
• Sturdy, fast‑curing adhesive provides a functional cure in one hour.
Color: Straw
Adhesive Tensile Shear: 3,200 psi Test & Approvals: Peel strength tested according to ASTM D1876‑61P;
Tensile Strength: 3,200 psi Resistance tested by immersion of bonded steel lap joints for 2 weeks in
Chemical Compound: Epoxy antifreeze, jet fuel, 10% and 50% sulfuric acid, and 10% and 20% potassium
Working Time: 65 min hydroxide, and by immersion for 2 months in gasoline at 72 °F; Shear
Dielectric Strength: 490 V/mil strength tested according to ASTM D1002; Compression shear strength tested
according to ASTM D3931; Impact resistance tested according to ASTM D950

Color: Straw

Adhesive Tensile Shear: 3,500 psi

Gap Fill: 1/8 in

Chemical Compound: Methyl Methacrylate

Working Time: 4‑6 min

SKU Capacity Vol. Packing Type SKU Capacity Vol. Packing Type
230‑14315 50 mL Dev‑Pak™ 230‑14300 25 mL Dev‑Tube™
230‑14415 400mL Cartridge 230‑14320 47 mL Cartridge
230‑14385 400 mL Cartridge

54 ORSNASCO.COM © 2016