Page 58 - APEX MRO Products

ADHESIVES, SEALANTS & TAPES

Industrial Safety Welding Oilfield Construction

ADHESIVES, SEALANTS & TAPES Wear Guard™ Fine Load Wear Guard™ High Load

•FeaHtiugrhe‑sd:ensity, micro‑alumina ceramic bead‑filled F•eaAtluurmeisn:a ceramic bead‑filled epoxy

epoxy system for protecting equipment that system with outstanding abrasion
handles particulate smaller than 1/8”. resistance for severe service conditions
with particulate greater than 1/8”.
• Excellent for dust particulate
• Will not sag on overhead or vertical surfaces.
applications including slurry • Exceptional resistance to a wide range
pumps, scrubbers, screens, and screw conveyors.
of acids, bases, saturated salt solutions,
• Can be troweled to form a smooth surface. oils, and many other chemicals.
• Outstanding resistance to a wide range of chemicals.
• 45‑minute working time. • Ideal for repairing scrubbers, ash

Test & Approvals: Chemical resistance was tested by immersion for 30 days at handling systems, pipe elbows, screens, and chutes.
75 °F, after 7 days room temperature cure
• 45‑minute working time.
Color: Grey
Adhesive Tensile Shear: 1,375 psi Test & Approvals: Chemical resistance was tested by immersion for 30 days at
Tensile Strength: 4,300 psi 75 °F, after 7 days room temperature cure
Compressive Strength: 11,000 psi
Gap Fill: 3/4 in Color: Grey
Chemical Compound: Epoxy
Working Time: 45 min Adhesive Tensile Shear: 1,474 psi
Dielectric Strength: 340 V/mil
Tensile Strength: 4,210 psi

Compressive Strength: 11,000 psi

Gap Fill: 3/4 in

Chemical Compound: Epoxy

Working Time: 30 min

Dielectric Strength: 340 V/mil

Packing Type: Kit

SKU Capacity Vol. SKU Capacity Vol.
230‑11470 30 lb 230‑11490 30 lb

Wear Guard™ High Impact Wear Resistant

Features: Putty WR-2

• 45‑minute working time. Features:
• Can be troweled to form a smooth surface.
• Excellent for dust particulate applications • Bonds to steel, iron, aluminum,

including slurry pumps, scrubbers, screens, and screw conveyors. ceramic, concrete, brass, and some plastics.

• Outstanding resistance to a wide range of chemicals. • Contains wear‑resistant fillers for low friction applications.
• High‑density, micro‑alumina ceramic bead‑filled epoxy • Also available in liquid form.

system with flexible polymers for superior adhesion and Test & Approvals: Chemical resistance was tested by immersion
protection against extreme impact and flexing. for 30 days at 75 °F, after 7 days room temperature cure
Test & Approvals: Chemical resistance was tested by immersion Color: Dark Gray
for 30 days at 75 °F, after 7 days room temperature cure Adhesive Tensile Shear: 2,200 psi
Color: Grey Tensile Strength: 4,300 psi
Adhesive Tensile Shear: 2,567 psi Compressive Strength: 9,800 psi
Tensile Strength: 4,220 psi Gap Fill: 1/4 in
Compressive Strength: 7,250 psi Chemical Compound: Epoxy
Chemical Compound: Epoxy Working Time: 1 hr
Working Time: 45 min Dielectric Strength: 400 V/mil

SKU Container Size SKU Capacity Vol.
230‑11460 30 lb 230‑11410 1 lb
230‑11420 3 lb

56 ORSNASCO.COM © 2016