Page 57 - APEX MRO Products

ADHESIVES, SEALANTS & TAPES

Industrial Safety Welding Oilfield Construction

Plastic Welder™ II R-Flex™ Belt Repair Kits ADHESIVES, SEALANTS & TAPES

F•eaFtourrmeus:lated for difficult‑to‑bond engineered plastics such as F•eaRteupraeisr:holes, gouges and tears in SBR conveyor belt.
• Coats hinged or solid plate fastener systems to protect them from damage.
nylon‑based alloys, epoxy composites and modified polyesters. • Rebuild worn rubber top ply of SBR belts protecting

• Room temperature cure, with a functional cure in three hours. surface from abrasion and impact from aggregate.
• Bonds dissimilar substrates. Color: Black
Adhesive Tensile Shear: 89 pli surface rubber pull
Test & Approvals: Peel strength tested according to ASTM D1876‑61P; Tensile Strength: 1,462 psi
Resistance tested by immersion of bonded steel lap joints for 2 weeks in Chemical Compound: Urethane
antifreeze, jet fuel, 10% and 50% sulfuric acid, and 10% and 20% potassium Dielectric Strength: 350 V/mil
hydroxide, and by immersion for 2 months in gasoline at 72 °F; Shear Packing Type: Kit
strength tested according to ASTM D1002; Compression shear strength tested
according to ASTM D3931; Impact resistance tested according to ASTM D950

Color: Straw

Adhesive Tensile Shear: 3,000 psi

Gap Fill: 1/8 in

Chemical Compound: Methyl Methacrylate

Working Time: 2‑3 min

Packing Type: Dev‑Pak™

SKU Capacity Vol. SKU Container Size
230‑14340 47 mL 230‑15565 1.5 lb

Plexus® MA830 Gray Underwater

Adhesive & Activator Repair Putty (UW)

F•eaTtwuore‑psa: rt methacrylate adhesive designed for structural F•eaPteunreetsr:ates wetness to bond securely to

bonding of metals without primers. steel, iron, aluminum, brass, bronze, concrete, wood, and some plastics.

• Bonds thermoplastic and composite assemblies • Invaluable for use in pulp and paper mills, wastewater

with little or no surface preparation. treatment plants, and marine environments.

• High strength ‑ excellent fatigue endurance and impact resistance. • Eliminates the need for substrate to be thoroughly dry before repair.
• Non‑rusting.
Color: Gray • Easy‑to‑mix and apply.
Adhesive Tensile Shear: 2000 ‑ 2,500 psi • Cures in temperatures as low as 40°F.
Tensile Strength: 2000‑2500 psi
Chemical Compound: Methacrylate Test & Approvals: Chemical resistance was tested by immersion for 30 days at
Working Time: 4‑6 min 75 °F, after 7 days room temperature cure
Packing Type: Cartridge Color: Gray
Adhesive Tensile Shear: 2,685 psi
Compressive Strength: 5,625 psi
Gap Fill: 1/4 in
Chemical Compound: Epoxy
Working Time: 45 min
Dielectric Strength: 150 V/mil

SKU Capacity Vol. SKU Capacity Vol.
230‑IT187 380 mL 230‑11800 1 lb

© 2016 1.800.678.6577 55