Page 25 - type de document

EOS 9XXXX-Template layout for gantry’s floor anchors

IMPORTANT: Keep in mind that Template “B” will have dual purpose and will
be used again in PART 2.

e. Once the holes have been pre-drilled, remove the templates and

proceed to drill the holes all the way to the suggested 2.5 – 3.0 cm
depth.

f. Notice that there are two separate diameters to drill and they both
use different types of anchors. (see image)

g. The PDU requires 4X - 14mm diameter holes (M12 HDG anchors)

h. The Laser column, the Cable tray and the Generator require 14X
8mm diameter holes (M6 HKD Drop-in anchors).

i. Put template A away you will only need Template B on the next step