Page 20 - type de document

EOS 90395-A-PHY-0002-Column feet assembly & setting

4) The remaining quadrant will not play a role in the adjustment and it will be adjusted so

that it makes no contact with the leveling plate. Now, on the chosen “no contact”

quadrant, turn its leveling bolt CCW by a few turns.

5) There should only be 3 quadrants touching the plate now.

6) Apply even pressure with one hand at the center of the leveling plate while adjusting

the levelling bolts with the other hand.

7) With your eyes on the bubble levels, carefully adjust one bubble, in one direction at

the time. We identify each separate direction here as “X” and “Y”. You choose which

direction to start with.

8) Once the 3 points are leveled, carefully proceed to raise the fourth quadrant (No

contact) by turning its bolt CW until it contacts the leveling plate but does not affect the

previous adjustment.

d. Apply the same technique to the other side