Page 18 - type de document

EOS 90395-A-PHY-0002-Column feet assembly & setting

14. FINAL TIGHTENING AND PROPER TORQUING OF THE ALL ANCHOR BOLTS

a. Proceed to tighten all 32 anchor bolts. You will need a 24mm deep-socket key to complete
this task. This tool is not provided with the equipment.

b. Pick a side and use the “STAR-PATTERN SEQUENCE” technique to tighten the bolts. Apply
an initial 50 Nm of torque on the first round.

c. Complete the process applying a final torque of 80Nm
while continuing to use the ‘start pattern sequence’ as
shown above.

IMPORTANT: There are two separate
torque wrenches available in the tools.
They have different torque capacities so
make sure you use them in the proper
sequence. Both will be used in the same
procedure.