Page 43 - Claudia Nevin

Specifications

Manufacturing Details: Installation:
Main Body, Drawers, Bins and Door will all be rotationally Door will be cut out from the main mould and then reattached

moulded using a high percentage recycled polypropylene. with hinge mechanisms. There will be a slight indentation
Material: recycled dark green polypropylene around the door frame with a rubber coating to provide a seal

Other parts: Solar panels, handles, contact-less device and around the opening.
light fitting will be separately sourced and fitted to the machine Drawers: Drawer will also be attached via hinge mechanisms,
during the manufacturing process. and will be kept closed using the locking mechanism that is

Power: The machine only needs a small amount of energy to controlled via the app and the contact-less points above said
power the light, weight detectors in the drawers and the drawer.
contact-less device points. These will all be powered by the Other parts: The large door opening at the back of the main

solar panel on the high point of the machine. Creating a self body allows for the manufacturer to enter the body and fit any
powered econ friendly device electronics and provider a rubber sealant around all wire entry
points.

Claudia Nevin | c00240981 | Industrial Design | 2021 43