Page 13 - McD_5120-A1 Multi point DT service manual 120828_Neat

9.5 External lighting 10.0 Tills

External lighting must be provided to all areas of the DT sequence to 50 Lux throughout. Columns to be sited at Odema will undertake all till works associated with the multi point DT
least one metre in from kerbs to avoid damage from vehicles. configuration.

10.1 Cash booth

Two tills will be located in the CASH both as follows:
One till will be the ORDER till for the PRIMARY lane / COD
One till will be the cash till

A fused spur and socket outlet should be provided, located 400mm AFFL
immediately adjacent the position of each till as indicated on the H+K
booth drawing

10.2 Presenter booth

One till will be installed, this will be the ORDER till for the SECONDARY lane
/ COD

Order taking tills are connected directly to the COD units, therefore:

The PRIMARY order is ALWAYS taken in the CASH booth
The SECONDARY order is ALWAYS taken in the PRESENTER booth

A fused spur and socket outlet should be provided, located 400mm AFFL
immediately adjacent the position of each till as indicated on the Architects
drawing.

Acoustic screening is often necessary between the cash booth and the
rear of the kitchen and should be reviewed at the design briefing meeting.

NW5120-A1 Multi point DT service manual 120828/AC 13