Page 12 - JGS4x4 CATALOGUE

> Exterior Protection

Mirrors Blind Spot Mirrors Standard Mirrors

XS Mirrors DA6550R Right hand side
DA6550L
Left hand side
Working closely with
DA6892 one of Europe’s
leading mirror
manufacturers,
MUD has created
a retrofit mirror
for the Defender
that incorporates
a wide angle
convex mirror to
eliminate potentially
dangerous blind
spots. The Blind
Spot Mirror function
offers a huge
improvement in MTC5217
road safety, making
DA6893 lane changing Defender
manoeuvres safer MTC5083 Mirror arm 7” Standard
whether you’re in RRC8443 Mirror arm 11½” Large
slow or fast moving MTC5084 Mirror head 5 x 8” Standard
traffic. DA4034 Mirror head 6 x 10½” Large
MTC5217 Mirror assembly Standard
The surface area of
the XL Defender Mirror Head measures 245mm x 140mm Series
compared with the standard mirror glass area of 198mm DA2128 Mirror arm 7” Standard
x 124mm. The mirror area of the MUD Blind Spot mirror DA2130 Mirror head 7 x 5” Standard
is 173mm x 127mm and the convex section is 52mm x DA2301 Mirror glass 7 x 5” Standard
127mm. The convex section is fixed and not adjustable.
The MUD Blind Spot mirror is a straight swap for the Heated Mirror Kit
original Defender door mirrors, using the same fixing
method as the factory mirrors and even retain the same DA4598
XS Wing Mirrors styling as the original Defender door mirror to ensure Heated mirror kit
DA6892 Black backing Single an OE factory appearance. The MUD Blind Spot Mirror See the
DA6893 Silver backing Single is housed within a larger mirror head that in addition Enhancements
DA6900 Brunel backing Single to providing a larger reflective surface area than the section for more
DA6901 Primer backing Single standard Defender mirror glass, features the convex details.
XS Wing Mirrors exclude mirror arms. wide angle mirror glass. The mirror insert can be flipped
through 180 degrees within the mirror head so the
DA6901 wide-angle can be positioned at the top or the bottom
of the mirror. The MUD Blind Spot Mirror has been fully
homologated, E-marked and carries full EU Type Approval.
Unbreakable Mirrors
Head Dimensions Arm Length
DA4404 Flat mirror 204 x 140mm (8 x 5½”) No arm Flat with fixing kit
DA4405 Flat mirror 204 x 140mm (8 x 5½”) 170mm Flat with fixing kit and short arm
DA4406 Flat mirror 204 x 140mm (8 x 5½”) 290mm Flat with fixing kit and long arm
DA4407 Convex mirror 204 x 140mm (8 x 5½”) No arm Convex with fixing kit
DA4408 Convex mirror 204 x 140mm (8 x 5½”) 170mm Convex with fixing kit and short arm
DA4409 Convex mirror 204 x 140mm (8 x 5½”) 290mm Convex with fixing kit and long arm
Good visibility is imperative on today’s highways and byways so these new high impact resistant mirror heads are an
essential item.
> Optical quality polycarbonate lens - will not shatter like glass or discolour in sunlight.
> Strong, flexible polypropylene casing - will absorb hard blows without breaking.
> Universal - can be fitted to either left or right of vehicle.
> Lightweight - puts less strain on body fixings.
> Hard lacquer coating on lens - will repel condensation and surface water.
> Excellent reflectivity - superb daylight and night time vision.

Dirt D-fenders Keep the side of your Defender cleaner!

DA1193 DA1197 DA1198

Dirt D-Fenders are a great solution to the annoying Textured Smooth
problem of mud which splashes through the gap which Defender Finish Finish
exists between the bottom of the wheel arch and the 90/110/130 Rear of front wheel DA1193 DA1193S
mudflap of your Defender. They are an especially useful 90/110 Front of rear wheel DA1198 DA1198S
addition if you are using wider tyres. The Dirt D-Fenders 90 Rear of rear wheel DA1197 DA1197S
attach with rivets into the underside of the sill and wheel 110 Rear of rear wheel DA1194 DA1194S
arch flare. The smooth finish is suitable for painting to Note - DA1193(S) & DA1198(S) will not fit Defenders with
match your body colour. Supplied in pairs with fitting kit. rock/tree sliders fitted. DA1194S
16 www.britpart.com