Page 14 - JGS4x4 CATALOGUE
P. 14
> Exterior Protection
Rear Protection Bumpers & Bumperettes Added protection...
DA5647 DA5646 DA2071 Defender/Series Black
Rear bumperettes Pair
RRC2970 Defender/Series Black
Rear bumperette Single - RHS
RRC2971 Defender/Series Black
Rear bumperette Single - LHS
ISG000040 Defender Wolf Black
Rear bumperette Single - RHS
ISG000050 Defender Wolf Black
Rear bumperette Single - LHS
DA2071
DA5647 DA5646
Discovery 1 - 300Tdi - will also fit 200Tdi. See note below. Discovery 2
> One piece rear heavy-duty bumper manufactured from > One piece rear heavy-duty bumper manufactured from
5mm steel with incorporated steel end caps 4mm steel with incorporated steel end caps, finished in
> Finished in black. black. ISG000050
> Provision for NATO/recovery point in centre of bumper. > 2 Recovery points and 2 Hi-Lift jacking points included.
> Fixed to standard mounting points and for added > Fixed to standard mounting points and for added
strength, extra fixings in centre where tow bar mounts. strength, extra fixings in centre where tow bar mounts.
Note - Tow bar and rear lights not included. Note - Tow bar and rear lights not included. ISG000040
Will fit 200Tdi if 300Tdi lamps are used. Up to 3A771194 - right lamp - XFB101480; left lamp -
Right lamp - AMR6510; left lamp - AMR6509 XFB101490. From 3A771195 - right lamp - XFB000720;
DA5647KIT NEW left lamp - XFB000730
Replacement fitting kit for heavy-duty bumper DA5647. DA5646KIT NEW
Replacement fitting kit for heavy-duty bumper DA5646.
DA5647KIT DA5646KIT Rear stop bumps DQN500040
Defender 110 - Hi-Cap
Defender 130 - Hi-Cap
DQN500040
RHS Single
DQN500050
LHS Single
RRC2971
RRC2970
Replacement Surround Cameras
LR052028LR
Front bumper/tailgate/side view mirrors
Discovery 4
Range Rover Evoque
Range Rover Sport - 2014 onwards
Range Rover L405
LR031812
Range Rover L322 - 2010 - 2012
Reduce the risk of collision
during reversing. Photo courtesy of Gordon McKeown
DA4511
Parking Sensor Kit These bumper* mounted sensors will detect the distance between your vehicle and any rear obstruction and warn the
driver to any potential obstructions. An advanced parking solution for obstacle detection at the rear of your vehicle.
Reduce the risk of collision during reversing and reverse
parking manoeuvres with this kit.
As the reverse gear is engaged, a sound indicates that
the reverse sensors are activated. Any obstacle at the rear
of the vehicle is then detected and signalled to the driver
through a progressive sound whose frequency increases
when moving closer to the obstacle.
Enhance your safety through obstacle detection, even
when objects are out of the driver’s field of vision. Improve
comfort through easy parking manoeuvres. Suitable for
12v cars, SUVs and light commercial vehicles.
Kit contents include -
4 x Bumper fit sensors
1 x Warning buzzer Add an extra set of
1 x Control unit ‘eyes’ when reversing...
1 x Wiring harness
1 x Cutting tool
1 x Fitting accessories
1 x Installation instructions *Note - Not suitable for vehicles with metal bumpers.
18 www.britpart.com