Page 144 - JGS4x4 CATALOGUE

> Suspension & Axle

Axle Anti-Roll Bar Kits Heavy-Duty Drive Flanges

STC8156AAPY STC8156AA
Defender 90, 110 & 130/Discovery 1/Range Rover Classic Defender 90, 110 & 130/Discovery 1/Range Rover Classic
Yellow anti-roll bar kit with Britpart yellow polyurethane Black anti-roll bar kit with rubber bushes.
bushes.
Stiffen up your Land Rover! Front and rear kits complete with fitting instructions. Only suitable for vehicles with the
chassis and axle brackets fitted. These heavy-duty drive flange kits have been
Note - To fit these anti-roll bars to the rear of a Defender 90 Td5 - onwards 2 x EGP1661L & 2 x EGP1889 are required. engineered to outperform many of the inferior
To fit to a Defender 110/130 Td5 - onwards 2 x NRC5674 & 2 x 592773 are required. products available on the market. Manufactured from
5140 steel, they are much stronger than an OE drive
Fulcrum Brackets flange. Complete with hex head bolts and screw on
caps with integral seal.
DA1148
DA1129KIT Defender - from LA/Discovery 1 - from JA Pair
Range Rover Classic - ABS and front from JA
DA1149
Fulcrum Bracket with Defender - up to KA Pair
High Articulation DA1148CAP
DA1129ULTRA Replacement drive flange cap with rubber Single
Defender seal for DA1148 & DA1149
Discovery 1 DA1128 Qty 10
Range Rover Classic Replacement drive flange bolt set for DA1148 & DA1149
DA2989 Qty 20
Drive flange bolt caps
DA1129ULTRA DA1148

DA1129ADJ
One of the major factors limiting the rear suspension
Defender/Discovery 1/Range Rover Classic movement on vehicles fitted with an A-frame is the
DA1129 standard ball joint. We have developed this part to provide
With ball joint assembly (ANR1799) significantly more articulation than the standard and most
DA1129G aftermarket joints. Others claim more articulation yet in
With OEM ball joint assembly (ANR1799G) reality they offer very little over the standard 30°. This
DA1129ADJ exclusive ball joint offers 45° movement in all directions. DA1148CAP DA1128
With adjustable ball joint assembly (ANR1799A) It is easily adjustable with a regular hex spanner and has
DA1129KIT a grease nipple for convenient regular maintenance. It is
Fitting kit for all fulcrum brackets supplied fitted ready to bolt to your Land Rover.
Castor Corrected DA3203
Swivel Housings Defender - from LA up to WA DA2989
DA2992
‘3 degrees of Discovery 1 - JA32851 onwards - non-ABS
DA3203 additional castor’ Range Rover Classic - JA624517 onwards - non-ABS
Normally the only way to correct the castor angle on a
beam axle vehicle is to fit castor corrected radius arms
or go through the lengthy process of repositioning the
brackets on the axle. Something which takes considerable
time and skill. Britpart offer you an alternative. These
castor corrected swivel housings come as a handed pair. Panhard Rod
They are a direct replacement for vehicles normally using If your Land Rover has raised suspension it
the FRC7065 swivel housing but they have the mounting is wise to use an adjustable panhard rod
holes positioned to give 3 degrees of additional castor. to correct the axle position which will
The swivel housings are from the OEM supplier and in turn maintain and restore the
then machined to our specification. Kit contents - Swivel steering geometry.
housings; swivel pin bearings; gaskets; seals; plates;
shims; joint washers; swivel pin uppers - non-ABS & swivel
housing grease sachets.
DA1130
DA1130
Bush Kits DA1242 Range Rover Classic - up to 1985 Front bush kit Ninety/One Ten
DA1243 Range Rover Classic - up to 1985 Rear bush kit Defender
DA1244 Defender - up to KA Front bush kit Complete with yellow polyurethane bush set
DA1244G Defender - up to KA OEM front bush kit
Defender - from LA up to VA130784/Discovery 1
DA1245
Range Rover Classic - from 1986 onwards Front bush kit
Defender - from LA up to VA130784
DA1245G Discovery 1 OEM front bush kit
Range Rover Classic - from 1986 onwards
DA1246 Defender - from VA130785 up to 2A626645 Front bush kit
DA1247 DA1247 Defender - from 2A626646 onwards Front bush kit
Defender to 9A768936/Discovery 1
Front bush kits include bushes for radius DA1248 Range Rover Classic from 1986 on Rear bush kit

arms and panhard rods. Rear bush kits Defender to 9A768936/Discovery 1
include bushes for top & bottom links. DA1248G Range Rover Classic from 1986 on OEM rear bush kit

DA1249 Defender from 9A768937 Rear bush kit
148 www.britpart.com