Page 148 - JGS4x4 CATALOGUE

> Suspension & Axle

Adjustable Ball Joint Dislocation Cones These clever
products ensure
your springs
DA1965 DA2186 relocate
correctly when
using your Land
Rover in extreme
conditions. Use in
conjunction with
spring retainers.

ANR1799A
Defender/Discovery 1/Range Rover Classic
An adjustable A-frame ball joint Galvanised
Single Stainless Steel
DA1965 Defender 110 Rear Pair DA2186 Defender 90/Discovery 1 Rear Pair
Spring Retainers DA1215 Rear Spring Seats
DA2363 In some situations the vehicle’s
springs can get dislodged from Galvanised rear spring seat fitting kits
their seating, these heavy-duty DA1215
spring retainers ensure Defender - 90/Discovery 1/Range Rover Classic
the springs are kept DA1233
in the correct Defender - 110 & 130
position. NRC9700GALV
Galvanised spring seat - single
Defender
Discovery 1 Rear Shock Droppers
Range Rover Classic
DA2362 Front DA7528 NEW
DA2362 DA2363 Rear Rear shock absorber
droppers
Turret Rings DA6338 Pair
Defender
DA6338 Discovery 1
Defender Range Rover Classic
Discovery 1
Range Rover Classic
These robust & heavy-duty front shock absorber turret rings are
made to replace the existing standard turret rings.

Spring Spacer Blocks
DA6344 DA6345 DA6341 DA6342

Defender - 90/Discovery 1/Range Rover Classic Discovery 2
These 50mm spring spacer blocks are manufactured from 6mm plate with a powder These 40mm spring spacer blocks are machined from high quality aluminium and
coated finish. The spacers fit between the axle and the spring seats on the front and anodised deep blue.
rear to give you that extra 50mm of lift you need. DA6341 Front pair
DA6344 Front pair With this kit you are able to retain the standard springs and shock absorbers.
DA6345 Rear pair Use in conjunction with DA6342.
DA6342 Rear pair
Lift Rod Kit This kit enables you to retain your air springs yet give your vehicle the desired 40mm
lift. We recommend that this kit be fitted in conjunction with DA6341, DA4198 or DA4199.
Please look at the shock absorbers suitable for this vehicle and at 40mm braided brake
hoses.
Fully Adjustable Suspension Lift Rod Kit
DA7531
Discovery 3/Discovery 4/Range Rover Sport - 2005 - 2013
“The ease of changing the ride height is what separates these rods from others in
the marketplace.”
These adjustable rods replace the plastic and rubber parts Land Rover supply on
the vehicle. Made from aluminium with an industrial heavy grade rubber bushing, the
aluminium parts are anodised black to help with corrosion protection and blending in
when in the garage for work. The lift rods have two settings; standard and off-road.
With the air suspension set to normal driving height the lengthened rods will give you
standard road and off road driving heights. If you shorten the rods the standard ride
height will be approx 50mm higher. If you select off-road height the vehicle will be in
the ‘super extended’ position. No tools are required and should take no more than 2
minutes to do all four rods. Access to the front is over the front wheels and for the back
is through the rear wishbones (blanket required!)
Note - If run for a long time in off-road position then wheels may need realigning.
152 www.britpart.com