Page 147 - JGS4x4 CATALOGUE

> Suspension & Axle

Suspension Bolt Kits Brackets, Mounts & Ancillary Products

Shock Absorber Brackets & Turrets
DA1186
Sometimes off-road
conditions can be
serious enough to
test the standard
DA7202
equipment on your
DA7202 Land Rover...
Defender - up to KA930455
Front suspension - radius arms & panhard rod bolts Defender/Discovery 1 Heavy-duty Plus 30mm
DA7200 Range Rover Classic Front Turrets
Defender - LA930456 to WA159806 DA1186 DA1164
Front suspension - radius arms & panhard rod bolts Galvanised standard height front Discovery 2
DA7203 shock turrets with fitting kit. Finished in heavy-duty powder
Defender - XA159807 to 2A626645 NRC6372GALV coating. Complete with nuts and bolts.
Front suspension - radius arms & panhard rod bolts Galvanised standard height front
DA7204 shock turret - single
Defender - 2A625546 onwards NRC9700GALV
Front suspension - radius arms & panhard rod bolts Galvanised spring seat - single
DA7201
Defender - up to YA185790
Rear suspension - trailing arms & a-frame bolts
DA7208 DA6322 DA6322L DA6324
Defender - YA185791 onwards
Rear suspension - trailing arms & a-frame bolts
DA7212
Discovery 3/Discovery 4/Range Rover Sport - 2005 - 2012
Front upper suspension arm Single
DA7205
Discovery 3/Discovery 4/Range Rover Sport - 2005 - 2012
Front lower suspension arm Single
Note - This kit includes a 1.5mm pitch threaded nut, please check the thread pitch
on your drive shaft before changing. If you require the 2mm pitch nut please Kit includes nuts, bolts & washers
order LR024151.
DA7207 DA6323 DA6323L
Discovery 3/Discovery 4/Range Rover Sport - 2005 - 2012
Rear upper suspension arm Single
DA7206
Discovery 3/Discovery 4/Range Rover Sport - 2005 - 2012
Rear lower suspension arm Single

Heavy-duty Axles
Defender heavy-duty axles are a straight replacement for
your existing axles and offer substantial protection.
> CNC cut > Powder coated
> Exact replacement > Heavy-duty mounts
> 6 - 10mm steel DA6322 Defender/Discovery 1/Range Rover Classic* Twin shock turrets Front Standard height
DA1708 NEW Front axle DA6322L Defender/Discovery 1/Range Rover Classic* Twin shock turrets Front 2” Lift
DA1706 NEW Short nose rear axle DA6323 Defender/Discovery 1/Range Rover Classic* Single shock turrets Front Standard height
DA1707 NEW Long nose rear axle DA6323L Defender/Discovery 1/Range Rover Classic* Single shock turrets Front 2” Lift
DA6324 Defender/Discovery 1/Range Rover Classic* Twin shock brackets - kit Rear
Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its
maximum. One of the critical components that takes most of the abuse is the suspension system. When using the
standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret
DA1708 mount. These shock absorber turrets from Britpart give you confidence that your vehicles suspension will tackle the
terrain you take it through with greater ease.
The single shock absorber turret is manufactured from heavy-duty steel and replaces the existing turret mount which
is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is
harder wearing and easier to clean.
The twin shock absorber turret is manufactured from the same quality steel as the single shock absorber turret but
allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land
Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable
ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it
improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is
no need to remove the turrets.
DA1706
*Note - Rear brackets involve some welding to fit. Fitting shock absorber brackets may require some vehicle
modification, please ask distributor for full details.
DA6337 Long Travel Rear Shock Absorber Mounting Kit
DA6337
Defender/Discovery 1/Range Rover Classic
The standard pin and eye shock absorbers don’t have
the necessary articulation for extreme off-road conditions
and the answer is to use pin and pin shock absorbers. If
DA1707 you use our Cellular Dynamic Plus 5 shock absorbers they
offer better articulation. Laser cut, jigged and computer
welded with zinc plated and powder coated finish. To be
used in conjunction with DC6000LL.
Note - On Defender Td5 the fuel filter must be moved.

www.britpart.com 151