Page 44 - STARTER KIT PUBLIC AREA 2017v

STARTER KIT | HK-Public Area Attendant

Task 7: Clean the floor
OPERATING PROCEDURES STANDARD(s)

Marble Tiles Daily cleaning of lobby/ public area floors is done after 12mn.
1. Place “Caution Wet Floor” signage.
Signage is in proper place while cleaning.
2. Remove dirt by sweeping floor with a soft broom and dust
pan. Floors are dry, free from dust/ dirt, no foul odor and shiny.

3. Dust with vacuum cleaner. All equipment and materials are cleaned and properly stored
after usage.
4. Mop floor using warm water.
- If with stubborn dirt / heavy stain, remove by Polishing of floor is done daily during graveyard shift.
using scrubbing pad and APC carefully.
- After scrubbing, wipe with a damp wet cloth.

5. Dry the floor by wiping with a dry clean cloth.

6. Polish floor.
- Spray floor with Terranova chemical.
- Polish using a floor polisher in a circular/
clockwise motion from farthest part of the room
going to the door/ exit.

Wood planks/ parquet
1. Sweep with a soft broom to remove dirt.

2. Dust with a vacuum cleaner.

3. Mop with a mop head with dust mop oil.
- Spray small amount of dust mop oil in the mop
head.
- Let it dry before applying in the wood for about
five (5) minutes.
- Mop the floor.
- Dry the floor for 8 hours.

Flotex carpet
1. Sweep with a soft broom to remove dirt.

2. Dust with a vacuum cleaner.

3. If with stubborn stain and dirt, remove using a spatula and
place the dirt/stain the used rag.

4. Shampoo carpet using a carpet extractor using low foam
in a circular/ clockwise motion from far end corner of the
room going to the door.

5. Dry newly shampooed carpet with a carpet blower.

39