Page 8 - Cheshire Stables Brochure email 2018
P. 8

Ground Anchors                            HELP TO KEEP YOUR MOBILE BUILDING FIRMLY GROUNDED!
  G
  R
  O
                                                   Using our ground anchors for field shelters or stables is easy!
  U D
                                                   1. Look up the size of your building in the table below.
  N
                                                   2. Decide on the location of the shelter keeping it close to hedges, fences, trees
  N H
                                                   or other buildings as these will protect your building.
  A C O
                                                   3. Finally select the row that matches your building and if it has a canopy
  S
  R
                                                   (overhang) at the front.
                                                   If your selection shows two different lengths of anchor then the short ones must be
                                                   If your selection shows two different lengths of anchor then the short ones must be
                                                   installed at the rear of the shelter and the longer ones at the front. Where shelters
                                                   have more than one opening or door, then one anchor must be used between each of
                                                   the doors.
                                                   These anchors must be used our through slot brackets.
                                                   They need to be fitted to the bottom edge of the shelter using M10 coach screws.
                                                   Once the brackets are fitted to the shelter then place the end of the anchor through
                                                   the slot and drive it in using a short handled sledge hammer.
                                                   the slot and drive it in using a short handled sledge hamme The anchors can be
                                                   removed by unscrewing them with a 29mm socket or spanner.

         Example:
         Double stable out in the open field not protected
    k  u  with a standard 3ft overhang would require Kit 4
    c.  e.  Kit 4 RRP, £230.80 ex VAT
    hsis b so  al e@ cehet  r  For self assembly an installation cap will be needed





         Hammer Cap £33.90 ex VAT
    as
    sl
        Call us on 01606 272788
        www.cheshirestables.co.uk
   3   4   5   6   7   8   9   10