Page 68 - Orthopedic Casts and Splints2

Performance Steps

12d
Apply webril to stockinette edge

e. With each turn overlap the webril by 1/2-1/4 the previous wrap. The top of the webril should
bisect the middle of the previous layer covering up the shallow line and present evenly
applied padding.
NOTE: The cast padding can be cut or torn (horizontally ) when wrapping through the palm to provide
a better fit. The technician preference will determine which technique to use.
13. Prepare casting materials.
a. If using fiberglass casting materials go to step 14, 15 and 16.
b. If using plaster casting materials go to step 16.
14. Place fiberglass casting gloves on hands.
Caution: The use of fiberglass casting gloves are mandatory to prevent the technician from receiving
chemical burns while applying a fiberglass cast.

15. Open fiberglass casting package and go to step 16.
NOTE: Open one fiberglass package at a time. As fiberglass roll comes in contact with the air, the roll
will start to cure and harden.
16. Apply 1st plaster/fiberglass roll.
NOTE: Examination gloves are recommended to protect the technician's hands as the resin in the
plaster rolls may cause the skin on the hands to dry up.
a. Hold plaster or fiberglass roll with one hand.

65