Page 71 - Orthopedic Casts and Splints2

Performance Steps

16f
Cut technique for plaster material

NOTE: The cast is most susceptible to losing strength in the palm region. Therefore, a twisting or cut
method is authorized.

The Twisting method: As the roll is pushed through the palm pinch the sides of the plaster roll
together (not recommended for fiberglass) twist and evenly space the casting material on the webril.
Smooth out with volar side of fingers. The twisting method provides strength to the cast ( Refer to figure
3-x)
The CUT method: As the roll is pushed through the palm make a horizontal cut to the proximal edge
of the plaster/fiberglass roll and smooth out with volar aspect of fingers or palm. The cutting method
provides cast cosmetics. Each technician may have their own preference to these methods.(Refer to
figure 3-x)
f. Continue through the palm ending 1/2 inch distal to the edge of the webril, back up the
forearm ending 1/2 inch proximal to the edge of the webril( Refer to figure 3-x)

68