Page 196 - Manual_Movie Edit Pro 2021_EN_Neat

196

Feedback: This adjusts the number of echoes. Turn the dial completely to the left,
there is no echo at all; turn it completely to the right and there are seemingly endless
repetitions.

Mix: This fader determines how much of the unprocessed original sound (dry signal)
is subjected to the echo (wet signal). Application of this effect in an AUX bus requires
the controller to be set to 100% (all the way to the right).

Audio effects in the mixer

You can open audio effect devices in the mixer using the "FX"
button found in each track or in the right master area.
Under "Mastering" you will also find MAGIX Mastering Suite.
"Reset" resets all effect settings to original values.

Equalizer

The 10-band equalizer subdivides the frequency spectrum into ten areas ('bands') and
equips them with separate volume controls. This way it is possible to create many
impressive effects, from a simple boosting of the bass to complete elimination of a
certain range of frequencies. Note: If low frequencies are boosted too much, the
overall sound level is heavily increased which may lead to distortion. In this event,
adjust the overall volume downward by using the 'master volume' control situated at
the bottom center of the effect rack.

www.magix.com