Page 61 - Dante Controller User Guide

Dante Controller User Guide

n When set to Information, all events are shown.

n When set to Warning, only warning and error events are shown.
n When set to Error, only error events are shown.
Clearing the Event List

To clear the event list, click the Clear button. When new events are detected that match the current filter
setting, they are displayed in the event list.
If you have switched to another Network View tab, new events in the event list will also be indicated by a

red Event Log LED icon in the Status Bar. Clicking the LED icon will take you straight to the Events tab
and will clear the Event Log LED.

Note: The Event Log LED icon will always remain green while the Events tab is open.

Saving the Event Log
To save the event list, click the Save button. The list is saved as a text file with file extension .log. All
events in the list are saved (the filter does not apply to saved events logs).

Automatic event logging
Events are also continuously written to a log file. Each time Dante Controller is started, it creates a new log
file (with a time-stamped filename, to avoid overwriting previous logs).
You can find the path to these log files under Help > About. To delete log files more than seven days old,
click the Delete old Log files button.

Event Classification
The following events are classified as Errors:
n Invalid link local address
n Subnet mismatch on dante interface
n Subnet match with non dante interface
n Multiple addresses with matching subnets

n Subnet conflict of dante interface on primary
n Subnet conflict of dante interface on secondary
n Unknown address error
n Fail Safe Mode
n Unknown device issue
n Elevation to Clock Master

n Fanout Configuration detected
n Mismatched clock pullup subdomain
n Wrong subdomain for pullup
n Unknown subdomain
n Audio mute / Audio unmute
n Clock sync lock / unlocked

The following events are classified as Warnings:

Copyright © 2020 Audinate Pty Ltd. All rights reserved. -61-