Page 68 - Regal ideas Binder_USA_v3

Frameless Glass Railing
®
Installation Instructions
FRAMELESS GLASS RAILING SYSTEM

GLUE DISPENSER AND ADHESIVE
Warning!: Please read and carefully follow ALL safety Diagram G
precautions as noted on the product packaging before
using the Acrylic adhesive.

GLUE DISPENSER FOR ACRYLIC
ADHESIVE (CRGG)

1. Press and hold metal lever while inserting plunger to
start position.
2. With locking mechanism in up position, load glue car-
tridge in gun, then secure in place with locking mecha-
nism.
3. Remove cap from glue cartridge by rotating it 90 degrees
counter clockwise and pull cap from cartridge.
4. Attach nozzle and turn 90 degrees clockwise to secure
in place.
5. Firmly press dispensing needle onto nozzle.
6. Insert needle into filling hole and dispense adhesive until
glue reaches overflow hole at top of clip.
7. Disengage plunger after usage and remove nozzle and
replace cap on glue cartridge.
Note: Nozzles and dispensing needles cannot be reused.
Glue will begin to set within a few minutes of non usage.
For this reason, it is suggested that all parts requiring glue
be installed first and then glue applied at the same time.
CRBW
CRBA
2 PART ACRYLIC ADHESIVE CRBA

Read directions and test a small area before use.

SET TIME: 5 minutes to apply and position. CRH
HANDLING TIME: 5 minutes undisturbed.
CURE TIME: 24 hours for load bearing weight. Application in
cooler temperatures and moist conditions may cause longer FIRST AID TREATMENT: If swallowed, call a Poison Control
cure times. Centre or doctor immediately. Do not induce vomiting. If in
CURED COLOUR: Semi-clear eyes or on skin, rinse well with water for min 15 minutes. If
TEMP RANGE: Bond withstands -50°C to 150°C. breathed in, move person into fresh air.
STORAGE: Store in a cool, dry place. Contains: Methyl methacrylate (80-62-6), Methacrylic acid
CLEAN UP: Remove excess glue immediately from (79-41-4), Benzoyl Peroxide (94-36-0)
project surfaces with dry cloth, Scrape off any excess Diisononyl phthalate (28553-12-0), High molecular polymer.
cured adhesive.

CONTENTS MAY BE HARMFUL. MAY IRRITATE EYES AND SKIN. Do not mix with other chemicals.
Do not Swallow. Do not get in eyes or on skin or clothing. KEEP OUT OF REACH OF CHILDREN.
WEAR SAFETY GLASSES AND CHEMICAL RESISTANT GLOVES. Do not breathe fumes. Use in a
well-ventilated area. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this
product.
12
regalideas.com Section 2 | Installation (Deck or Flat Surface)
V1.2