Page 41 - Newham SuDS DESIGN & EVALUATION GUIDE
P. 41

Concept Design  7.4.6  Introducing sub-catchments  When integrating SuDS into a development,   A flow control generally defines the   Concept Design drawings should identify   Concept Design

 Many drainage designs adopt an approach
                                                             sub-catchment boundaries with associated
      downstream end of a sub-catchment, with
 where all flows are taken to the lowest point
 the site should be divided into sub-
                                                             storage and flow control locations
      the flow control situated at the lowest
 catchments to maximise treatment and
 of the site and attenuated in a single location,
                                                             throughout the development.
      topographical point within the sub-
 often referred to as a ‘pipe-to-pond’ or ‘pipe
 storage capacity.
      catchment in locations that are accessible for
 to box’ approach.
 The sub-catchment boundary is usually
      inspection and maintenance.
 defined as the surface area which drains to a
 The ‘pipe to pond’ approach can result in
 unsightly, polluted and sometimes hazardous
 considered as a mini-watershed.
 pond or basin features that offer little
 amenity or wildlife benefit. The ‘pipe to box’   particular flow control, and can be   Flow control with
 Flows are conveyed from one sub-catchment
 approach results in below-ground structures   to the next along one or more management   contolled discharge
 that provide no amenity or wildlife benefit at                                       from one catchment to
 trains, following the modified flow routes                                           the next
 all. All end of pipe solution may fill with silt   determined early in the design process.
 and generate management problems.
 Each sub-catchment contributes flows to the                         C1
 following sub-catchment or to an outfall.



                                                                                           C2
                                                         C3


 35                                                                                                                36


                               C4

 Controlled flows are released from one sub-
 catchment feature to the next, as here at Birchen
 Coppice Primary School, Kidderminster.







      Sub-catchments are generally defined by flow
      controls. Flows are conveyed from one sub-
      catchment to the next.





                                                   Design Note:
          Integrating storage within sub-catchments, as part of site layout, greatly reduces the land
          take requirement for attenuation, by exploiting the inherent storage capacity of individual
                                                  SuDS features.



 London Borough of Newham SuDS D & E Guide                                                     © 2018 McCloy Consulting & Robert Bray Associates  London Borough of Newham SuDS D & E Guide                                                     © 2018 McCloy Consulting & Robert Bray Associates
   36   37   38   39   40   41   42   43   44   45   46