Page 77 - 2018_IPC

SANITARY DRAINAGE

702.2 Underground building sanitary drainage and vent TABLE 702.3
pipe. Underground building sanitary drainage and vent pipe BUILDING SEWER PIPE
shall conform to one of the standards listed in Table 702.2. MATERIAL STANDARD
Acrylonitrile butadiene styrene
TABLE 702.2 (ABS) plastic pipe in IPS
UNDERGROUND BUILDING DRAINAGE AND VENT PIPE diameters, including Sched-
MATERIAL STANDARD ule 40, DR 22 (PS 200) and ASTM D2661; ASTM F628;
ASTM F1488; CSA B181.1
Acrylonitrile butadiene styrene DR 24 (PS 140); with a solid,
(ABS) plastic pipe in IPS cellular core or composite
diameters, including Schedule ASTM D2661; ASTM F628; wall
40, DR 22 (PS 200) and DR 24 ASTM F1488; CSA B181.1 Acrylonitrile butadiene styrene
(PS 140); with a solid, cellular (ABS) plastic pipe in sewer
core or composite wall and drain diameters, including
ASTM A74; ASTM A888; SDR 42 (PS 20), PS 35, SDR ASTM F1488; ASTM D2751
Cast-iron pipe 35 (PS 45), PS 50, PS 100, PS
CISPI 301
140, SDR 23.5 (PS 150) and
Copper or copper-alloy tubing ASTM B75; ASTM B88; ASTM PS 200; with a solid, cellular
(Type K, L, M or DWV) B251; ASTM B306 core or composite wall
Polyethylene (PE) plastic pipe ASTM F714 ASTM A74; ASTM A888;
(SDR-PR) Cast-iron pipe CISPI 301
ASTM F1412; ASTM F714;
Polyolefin pipe ASTM C14; ASTM C76;
CSA B181.3 Concrete pipe CSA A257.1M;
Polyvinyl chloride (PVC) CSA A257.2M
plastic pipe in IPS diameters, Copper or copper-alloy tubing ASTM B75; ASTM B88;
including Schedule 40, DR 22 ASTM D2665; ASTM F891; (Type K or L) ASTM B251
(PS 200) and DR 24 (PS 140); ASTM F1488; CSA B181.2
with a solid, cellular core or Polyethylene (PE) plastic pipe ASTM F714
composite wall (SDR-PR)
Polyvinyl chloride (PVC) Polypropylene (PP) plastic pipe ASTM F2736; ASTM F2764;
plastic pipe with a 3.25-inch ASTM D2949, ASTM F1488 CSA B182.13
O.D. and a solid, cellular core Polyvinyl chloride (PVC)
or composite wall plastic pipe in IPS diameters,
Polyvinylidene fluoride ASTM F1673; including Schedule 40, DR 22 ASTM D2665; ASTM F891;
(PVDF) plastic pipe CSA B181.3 (PS 200) and DR 24 (PS 140); ASTM F1488
with a solid, cellular core or
Stainless steel drainage ASME A112.3.1 composite wall
systems, Type 316L
Polyvinyl chloride (PVC)
For SI: 1 inch = 25.4 mm.
plastic pipe in sewer and drain
diameters, including PS 25,
SDR 41 (PS 28), PS 35, SDR ASTM F891; ASTM F1488;
ASTM D3034; CSA B182.2;
35 (PS 46), PS 50, PS 100,
702.3 Building sewer pipe. Building sewer pipe shall con- SDR 26 (PS 115), PS 140 and CSA B182.4
form to one of the standards listed in Table 702.3. PS 200; with a solid, cellular
702.4 Fittings. Pipe fittings shall be approved for installation core or composite wall
with the piping material installed and shall comply with the Polyvinyl chloride (PVC)
applicable standards listed in Table 702.4. plastic pipe with a 3.25-inch ASTM D2949, ASTM F1488
O.D. and a solid, cellular core
702.5 Temperature rating. Where the waste water tempera- or composite wall
ture will be greater than 140°F (60°C), the sanitary drainage
piping material shall be rated for the highest temperature of Polyvinylidene fluoride ASTM F1673;
the waste water. (PVDF) plastic pipe CSA B181.3
Stainless steel drainage
702.6 Chemical waste system. A chemical waste system systems, Types 304 and 316L ASME A112.3.1
shall be completely separated from the sanitary drainage sys-
tem. The chemical waste shall be treated in accordance with Vitrified clay pipe ASTM C4; ASTM C700
Section 803.2 before discharging to the sanitary drainage sys- For SI: 1 inch = 25.4 mm.
tem. Separate drainage systems for chemical wastes and vent
pipes shall be of an approved material that is resistant to cor-
rosion and degradation for the concentrations of chemicals
involved.
702.7 Lead bends and traps. The wall thickness of lead
1
bends and traps shall be not less than / inch (3.2 mm).
8

60 2018 INTERNATIONAL PLUMBING CODE ®
Copyrighted © 2017 by, or licensed to, ICC (ALL RIGHTS RESERVED); licensed to UL, LLC pursuant to License Agreement with ICC. No further reproductions authorized or distribution authorized.
ANY UNAUTHROIZED REPRODUCTION OR DISTRIBUTION IS A VIOLATION OF THE FEDERAL COPYRIGHT ACT AND THE LICENSE AGREEMENT; AND SUBJECT TO CIVIL AND CRIMINAL PENALTIES THEREUNDER.