Page 236 - Modernfold Architectural Products

ACOUSTI-CLEAR MOTORIZED Technical Data
®
10 22 26 Operable Partitions

ACOUSTI-CLEAR MOTORIZED SERIES TECHNICAL DATA
®
b. 51 STC (not available with MorphGlas ™ intersections, and switches and curves insuring
7. U.L. listing: UL 962 - Household and Commercial both fit and roller surface integrity.
Furnishings; CSA C22.2 No. 68 - Motorized a. Exposed track soffit: Factory-finished
Appliances aluminum with white powder coat.
B. Solid (Non-Glass) Panels: 2. Carriers:
1. Type: Acousti-Clear Motorized Seal – Classic a. Smart Track - Two stainless steel trolleys
™
®
Panel. with vinyl roller surfaces (except Pivot
2. Nominal 4-inch (100 mm) thick panels in Panel). Trolley design incorporates
manufacturer’s standard 48-inch (1220 mm) eight (8) wheels of varying dimensions.
widths. All panel horizontal and vertical Automatic indexing of panels into stack
framing members shall be fabricated from area is provided by pre-programmed
aluminum extrusions and mechanically switches and trolleys without electrical,
fastened. pneumatic, or mechanical activation.
3. Panel Faces: 3/8-inch (9.5 mm) thick medium b. Right Angle Turn - Two stainless steel
density fiberboard continuously bonded to trolleys with vinyl roller surfaces. Trolley
aluminum panel frame. design incorporates eight (8) wheels of
4. Panel Finishes: varying dimensions that permit panels to
a. High pressure plastic laminate on MDF board. traverse L, T, and X intersections without
b. Wood veneer on MDF board. mechanical switching, on all panels
c. Full height steel or laminate markerboard. (except Pivot Panel).
5. Panel Trim: No visible trim permitted. 3. Warranty period: Two (2) years.
6. Acoustical ratings of panels with this
construction achieve Sound Transmission -OR-
Class of 50 minimum STC when tested in
accordance with ASTM E90 and classified in B. #17G Suspension System - Smart Track ™
accordance with ASTM E413. 1. Suspension Tracks: Minimum 11 gauge,
7. U.L. listing: UL 962 - Household and Commercial 0.12-inch (3 mm) roll-formed steel track suitable
Furnishings; CSA C22.2 No. 68 - Motorized for either direct mounting to a wood header or
Appliances supported by adjustable steel hanger brackets
C. Panel Weights: supporting the load-bearing surface of the track,
1. Glass Panel connected to structural support by pairs of
a. 45 STC - 10 lbs./square foot 3/8-inch (9.5 mm) diameter threaded steel rods.
b. 51 STC - 11.5 lbs./square foot a. Exposed track soffit: Steel, integral to
2. Classic/Solid Panel track, and pre-painted off-white.
a. 50 STC - 10 lbs./square foot 2. Carriers: Two all-steel trolleys with steel ball-
bearing wheels and vinyl tires (except Pivot
2.4 SOUND SEALS Panel). Automatic indexing of panels into
A. Vertical Interlocking Sound Seals between panels: stack area is provided by pre-programmed
Extruded aluminum astragals with interlocking switches and trolleys without electrical,
convex/concave resilient quad-lip gaskets. Rigid pneumatic, or mechanical activation.
plastic astragals or astragals with gaskets on only 3. Warranty period: Five (5) years.
one panel edge are not acceptable.
B. Horizontal Top and Bottom Seals shall be 2.6 OPTIONS
Modernfold ComforTronic® seals providing A. Pass Doors (Solid Panel):
7/8-inch (22 mm) operating clearance with an 1. Single Pass Doors:
operating range of +9/16-inch (14 mm) to - a. Matching pass door same thickness
3/8-inch (9.5 mm). Seals shall operate electrically and appearance as the panels. ADA-
without tools or cranks and shall extend as panels compliant pass door equipped with non-
are positioned. Fixed top or bottom seals or seals locking lever latch. No threshold will be
requiring cranks or tools for manual activation are permitted.
not acceptable. 2. Double Pass Doors:
a. Matching pass door same thickness and
2.5 SUSPENSION SYSTEM (SELECT ONE) appearance as the panels. No center
A. G-330 Suspension System post is permitted. Active leaf to be
1. Suspension Tracks: Extruded aluminum with trimless and equipped with non-locking
a minimum wall thickness of 0.235-inches lever latch. In-active leaf to be trimless
(6 mm). Incorporate cast aluminum or mitered and with non-locking lever and friction
intersections, switches, and curves in stacking latch. No threshold will be permitted.
area. Provide alignment pins for track, 3. Hardware (choose as required):
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 3