Page 237 - Modernfold Architectural Products

ACOUSTI-CLEAR MOTORIZED Technical Data
®
10 22 26 Operable Partitions

ACOUSTI-CLEAR MOTORIZED SERIES TECHNICAL DATA
®
a. Panic hardware. deployment. Activation deploys blinds in
b. Locking lever latch. closed position or transitions MorphGlas
®
c. Self-Illuminated exit signs. to opaque and temporarily disables
d. Butt hinges. closure and seals for maximum security.
B. Pass Doors (Glass Panel): Activation initiates blind deployment
1. Single Pass Doors: or transitions MorphGlas for point of
®
a. Matching pass door same thickness location partition.
and appearance as the panels. ADA- b. Main command location, emergency line
compliant pass door equipped with non- of sight deployment. Activation deploys
locking lever latch. No threshold will be blinds in closed position or transitions
permitted. Pass doors hinged or attached MorphGlas to opaque and temporarily
®
to adjacent panels are not permitted. disables closure and seals for maximum
2. Hardware (choose as required): security. Activation initiates blind
a. Locking lever latch. deployment or transitions MorphGlas of
®
b. Self-Illuminated exit signs. all partitions in security group.
c. Panic hardware.
d. Door closer. PART 3 – EXECUTION
C. Available Accessories/Options:
1. Blinds: 3.1 INSTALLATION
a. Fabrication: Aluminum slats suspended A. General: Comply with ASTM E557, operable
on nylon ladders. partition manufacturer’s written installation
b. Installation: Install between panes of instructions, Drawings and approved Shop
glass. Drawings.
c. Operation: Raising and tilt of slats shall B. Install operable partitions and accessories after
be electrically operated. Blinds requiring other finishing operations, including painting have
external handles or wands are not been completed.
acceptable. All blinds in an operable C. Match operable partitions by installing panels
partition shall operate in unison. from marked packages in numbered sequence
d. Control: Key switch. indicated on Shop Drawings.
e. Finish (select one): D. Broken, cracked, chipped, deformed or
1. Breeze #0262 unmatched panels are not acceptable.
2. Black #0048 E. Make connections to power as specified in
3. Alabaster #0002 Division 26 – Electrical.
4. Flex White #0885
2. Horizontal mullions 3.2 ADJUSTING
a. Prefinished aluminum to match trim finish. A. Adjust operable partitions to operate smoothly,
b. Same appearance and thickness as easily, and quietly, free from binding, warp,
panel frame/trim. excessive deflection, distortion, nonalignment,
c. Plastic mullions are not acceptable. misplacement, disruption, or malfunction,
d. Mullions attached directly to the glass or throughout entire operational range. Lubricate
panel face are not acceptable. hardware and other moving parts.
3. Pocket Doors: Acousti-Seal Pocket Doors by
®
Modernfold, Inc. 3.3 EXAMINATION
4. Intersecting partition interface (select one): A. Examine flooring, structural support, and opening,
a. Solid Panel – “Classic”: with Installer present, for compliance with
1. “L” Interface requirements for installation tolerances and other
2. “T” Interface conditions affecting performance of operable
3. “X” Interface partitions. Proceed with installation only after
b. Glass Panel: unsatisfactory conditions have been corrected.
1. “L” Post
2. “T” Post 3.4 DEMONSTRATION
3. “X” Post A. Demonstrate proper operation and maintenance
4. 135° Angle Post procedures to Owner’s representative.
5. Provide recessed, wall-mounted box for key B. Provide Operation and Maintenance Manual to
switches, complete with satin-finished stainless Owner’s representative.
steel cover plate.
6. Protector Series
a. Point of location emergency line of sight

4 Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.