Page 6 - QR CIMAR TRUSS SCREED
P. 6

 If fuel is spilled, wipe it away and wait until the fuel already dried before starting the
             engine.

        After refueling, make sure fuel tank cap is properly tightened.
        FILL THE CORRECT TYPE OF FUEL.

       WARNING FIRE PREVENTION

        Do not operate the engine when smoking.
        Do not place any flammable materials such as dry brush, twigs on the engine.
        Keep air intake (recoil starter area) and muffler side of the engine at least 1 meter (3 feet)

             away from building or flammable objects.
        Do not operate the machine near any flammable materials.

       CAUTION PRE-OPERATION CHECKS

        Carefully check fuel hoses and joints for looseness and fuel leakage. Leaked fuel creates a
             potentially dangerous situation.

        Check all bolts and nuts for looseness. A loose bolt or nut may be caused serious engine
             trouble.

        Check the engine oil and refill it if necessary.
        Check the fuel and refill it if necessary. Do not overfill the fuel tank.
        Keep cylinder fins and recoil starter free of dirt.
        Do not wear loose clothes or loose pans etc. It may get caught in the engine or screeder or

             the winches, thus, endanger the safety of the operator.
        Check gear belting condition and change them if necessary.
        Check mist lubricator condition and change it if necessary.
        Check oil filter condition and change it if necessary.

       WARNING ATTENTION IN USE

        Operate the screeder in suitable area.
        Do not uses for other purposes.
        Whenever machine fails to work properly or any abnormality is noticed during work, stop

             the machine immediately and notify supervisor or contact the supplier.
        Do not touch engine body or muffler as they are hot in operation and do not place

             flammable objects on the engine.
        After screeding, ensure that the complete system is completely washed. For pneumatic

             powered system, dry the vibrator pistons and oil them. For engine powered system, dry the
             bearings and oil them.

2. APPLICATION OF MACHINE

      Can screed high volume concrete slabs and pavements.
      Can screed concrete slabs and pavements to achieve better flatness.

                                                                                                           2
   1   2   3   4   5   6   7   8