Page 115 - QR CIMAR LASER SCREED

Step Description

7. Mark the position of the beam.

8. Rotate the laser 180° and allow it to self-level.

9. Mark the opposite side of the second axis.

 The Rugby is within its accuracy specification if the four marks are within
± 1.5 mm (± 1/16") from the centre.

10.2 Adjusting the Level Accuracy

Description In Calibration mode the X-axis calibration screen indicates changes to the X-axis.

X

007842_001

The Y-axis calibration screen indicates changes to the Y-axis.

Y

007843_001

Entering Calibra- Step Description
tion mode step-by-
step 1. Turn off the power.

2. Put the Rugby in an upright position.

3. Press and hold both the Up and Down Arrow buttons.

4. Press the Power button. The X-axis calibration screen appears. The Rugby is
now in Calibration mode.

In Calibration mode, the LED does not blink and the laser head continues to
rotate. An hour-glass indicates that the Rugby is levelling.

Rugby 870/880, Accuracy Adjustment 55