Page 54 - QR CIMAR LASER SCREED
P. 54
OPERATING SPEEDS & PRESSURES
Engine at full 3600 RPM, the Hydraulic Oil at Operating Temperature 90-100 degree F
MANUAL HEAD LIFT 10 SECOND CYCLE (UP/DOWN) 2500PSI MAX
20 SECOND CYCLE (UP/DOWN) 2500PSI MAX
AUTO HEAD LIFT
(MACHINE LEVEL)
VIBRATOR FACTORY SETTING 4500 RPM’S @950PSI
PROPEL
LINEAR ACTUATORS FWD/REV LEVEL DRIVE 400-500 PSI
SPEED 0 RPM TO 75 RPM ON KICKSTAND WITH ONE
WHEEL BLOCKED (WITH TRACTION ASSIST OFF)
5-8 SEC’S FOR FULL STROKE
COUNTER BALANCE SETTING PROPEL 1 1/2 TURNS OUT
MAX SYSTEM PRESSURE 3000 PSI
RECOMMENDED TOOLS & SPARE PARTS
RECOMMENDED TOOLS TO KEEP WITH EACH MACHINE
1) Set of standard open/box end wrenches thru 1”
2) Standard socket set to 1”
3) Pressure washer
4) Pressure can to spray on form release oil
5) 8mm Hex drive socket with 6” extension
6) Allen wrench sets (in. & metric)
GENERAL PARTS & SUPPLIES
1) Black electrical tape 5) Two JIC caps and plugs for each hydraulic hose
2) Nylon tie wraps size.
3) Carburetor Cleaner for cleaning parts
4) Lubricant such as WD-40 6) Engine oil
7) Form release oil
8) Spare transmitter batteries
52
