Page 84 - QR CIMAR LASER SCREED

4 RC800 Remote Control

4.1 Description of the Remote Control

The RF Remote Control communicates with the Rugby via RF (radio frequency) and is
used to control the same functions as on the laser.

RC800 Remote a f
Control b g a) LCD display
c e b) Power button
Description of the
Control Panel d c) Remote battery LED
e d) Grade button
e) Left and right arrow buttons
007830_002 h f) Rugby LED
g) Sleep mode button
h) Up and down arrow buttons

LCD Display Displays all required user information.
Power Button
Grade Button Press to turn on or off the Remote Control.
Up and Down Arrow
Buttons Press to start grade entry mode.
Left and Right Arrow
Buttons Press to change the grade displayed.
Press both simultaneously to reset the grade value to zero.
Sleep Mode Button
Press to display and move cursor for grade entry.
Press both simultaneously to enter the Rugby menu.
Press and hold simultaneously for 1.5 seconds to enter the
Remote Control menu.

Press to put the Rugby in sleep mode.
• During Sleep Mode, all functions are disabled.
• The LCD display indicates that the Rugby is in Sleep

Mode.
• The Rugby sleeps for 2 hours*, then shuts down auto-

matically and must be turned on again at the laser.
• When in Sleep Mode, pressing the sleep button wakes

the Rugby and normal operation is resumed.

Rugby LED Indicates level status of the Rugby.

Remote Battery LED Indicates when the batteries for the Remote Control
should be replaced.

* In the Remote Control menu, you can select the sleep time.

Rugby 870/880, RC800 Remote Control 24