Page 85 - QR CIMAR LASER SCREED

Replacing the  The remote control is powered by 2x AA batteries.
batteries
If the Remote Battery LED flashes, replace the batteries as shown in the picture.
2

3a 1

3b

007831_001

4.2 Pairing the Rugby 870/880 with the RC800 Remote Control

Pairing step-by-step The Rugby 870/880 and the RC800 Remote Control include radio devices that allow
you to activate the functions on the Rugby remotely up to 300 m (1000’) from the
Rugby.
Before using the RF features, the Rugby and the Remote Control must be paired
together to be able to communicate with each other.

Step Description
1.
2. Turn off both the Rugby 870/880 and the Remote Control.

3. Press and hold the Power Button on the Rugby for 5 seconds to turn on the
Rugby in pairing mode. The Rugby beeps five times slowly.

Press and hold the Power Button on the Remote Control until pairing is
 confirmed.

When the pairing is successful:
Both the Rugby and the Remote Control beep quickly five times and the
Status LED flashes green quickly (5 Hz). There is no confirmation on the LCD
displays during this process.

When the pairing is not successful:
Both the Rugby and the Remote Control beep slowly three times and the
Status LED flashes red (1 Hz).

Rugby 870/880, RC800 Remote Control 25