Page 94 - QR CIMAR LASER SCREED

6.3 Menu Set 2

Overview In the Menu Set 2, you can select the following parameters:
• Display Brightness
• Beam masking - Save at power off
• Temperature Sensitivity
• Negative Grade - enable/disable
• Radio - enable/disable

007621_001  To exit the menu, highlight and select the EXIT icon.
 OR: Wait for 8 seconds and the menu is exited auto-
Menu Set 2 matically.

Display Brightness To display the Menu Set 3, highlight and select the
MENU 3 icon.

With this setting, you can change the display brightness.
Use the Up and Down Arrow Buttons to adjust the bright-
ness as desired.

007622_001 Normally, the beam masking setting is disabled every time
you turn off the Rugby.
Display Brightness If you prefer to save the beam masking settings for usage on
screen the following day, you can enable the saving of the beam
Save Beam Masking masking setting:
at Power Off
• Save: The beam masking settings are saved at power off.
007623_001
• Don’t save: The beam masking settings are disabled at
power off.

007624_001

Save Beam Masking
screens

Rugby 870/880, Rugby 870/880 Menu 34