Page 11 - QR PENTRUDER 3P8

Operators Manual - High Frequency driven Pentruder 3P8 Wire Saw

• The operator should have good supervision over the wire saw and inform passing
persons about possible risks. Unauthorized persons shall not be within the risk area
(the area around the wire saw).

• Always lift modules of the wire saw ergonomically correct. The Pentpak is not provided
with handles for lifting.

• The base plate must always be securely anchored to perform sawing.

• Never run the wire saw without water cooling to the water pack and HF-motor. Should
the cooling water seeze to function, stop the machine immediately.

• Before sawing is commenced all persons involved must know how the emergency stop
buttons are working.

• Only connect the Pentpak 418, 422, 427, 222, 218 or 200 power packs to Pentruder
HF-motors or other HF-equipment which has been manufactured or approved by
Tractive AB .

Safety precautions on site

Check with the foreman responsible that all necessary precautions have been performed
before commencing work. Await the approval of the safety precautions and mounting position
of the machine from the responsible person before work is commenced.

Emergency stop

Show all persons involved in the job how the emergency stop on the machine is working.

Warning! If there is a possibility that pieces of material cut away when wire sawing may fall
causing injury or damage to persons or property then they must be secured before starting
work. The risk area must be roped off and a responsible person left in charge, in a safe place,
to prevent entry of unauthorised persons.

Pentruder® - Stronger than ever! Tractive AB 17 March 2009 Page 9
Applying Standards That Are Years Ahead Of the Competition.