Page 14 - QR PENTRUDER 3P8
P. 14
Operators Manual - High Frequency driven Pentruder 3P8 Wire Saw
How to position the wire saw
1. Be observant on what material the base plate will be mounted on. For safety
reasons it is very important that the base plate is properly fastened. If mounted on
brick or porous concrete we recommend to fasten the base plate with M16 / 5/8”
through bolts.
2. The wire cut line will be as shown in the drawing below. Please note: The column
can rotate around its own axis, and be locked in any position. Therefore you may
prefer to measure your anchor position from the center of the column.
Pentruder® - Stronger than ever! Fig.2. Measurements for positioning of wire saw
Applying Standards That Are Years Ahead Of the Competition.
Tractive AB 17 March 2009 Page 12
